Processing » Elektror

Building Filters

26

Used Elektror Processing

Trusted Seller
ELEKTROR SD-8 side channel blower 9m3/min 300 mbar - 5.5 kw
- Manufacturer: Elektror
Motor 5.5 kw 2880 rpm 3 x 380 V Gabinete móvil quick labs con superficie de trabajo en laminado plástico (4 cajones) | qlrc04-pl: 950 x 500 x H. 530 mm | Technical documentation: File 1 | Stock: 1
Wormhout, France
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, radial blower, radial ventilator ELEKTROR, KARL W. MÜLLER 7.0 m³/min 1.765 kPa ( 180 mmWs ) 2800 rpm 220 / 380 V 3 AC 50 Hz bolt circle diameter: 112 mm, 4x bore: Ø 11,2 mm used, tested !
$418 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fans, radial blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller V-belt pulley ( fan ): Diameter: Ø 80 mm, 2 grooves, groove width: 10 mm Motor : ATB, FLENDER, LOHER Type: A 112M/4/2...
$488 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, radial blower, radial ventilator ELEKTROR Karl W. Müller 2850 rpm 220 / 380 V 3 AC 50 Hz IP44 used, tested !
$337 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fans, radial blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller V-belt pulley ( fan ): Diameter: Ø 95 mm V-belt pulley ( motor ): Diameter: Ø 154 mm Motor : SINTEC A3-112M2-21 4,0 k...
$511 USD
Zschepplin, Germany
Trusted Seller
Centrifugal fan 0.37 kW 2800 rpm from Elektror - D-06/S 484 33868
- Manufacturer: Elektror
radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower
Wiefelstede, Germany
Trusted Seller
Centrifugal fan
- Manufacturer: Elektror
Flow rate: 27 m³/h | Total pressure differential: 8500 Pa | Engine speed: 5600 rpm | Power: 3,0 kW | Current: 10,9 / 6,3 A | Voltage: 230 / 400 V | Frequency: 95 Hz
Freising, Germany
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Diam Unit is a bare shaft side channel blower. Unit never commissioned. As new
Sydney, Australia
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Dia Unit is a skid mounted side channel blower. Driven by approx. a 11 Kw, 415 V electric motor.
Sydney, Australia
ELEKTROR SD-42
- Manufacturer: Elektror
Side channel blower. 3 Phase 1.3kW 220/380V 2800RPM 220mbar 2.8m³/min 1 inch inlet and 2 inch outlet Runs Well
Melbourne, Australia
Elektror Karl W. Müller Side channel blower 443835 SD-4
- Manufacturer: Elektror
Power: 0.75 Kw / 50 Hz / 3.2 / 1.85 A. | Rpm: 2820 | Connections: 220/380 V
Ederveen, Netherlands

12