Building Filters
TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2
- Manufacturer: LiSN
The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...
Midrand, South Africa
TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2
- Manufacturer: LiSN
The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...
Midrand, South Africa
TESCA Wiring Specimen Board
Wiring specimen board have been designed specifically to study different types of cables & wires. With help of this trainer student can make easy understanding with different kind of wires & cables. It consists f...
Midrand, South Africa
Probe for 3 kHz to 100 MHz
The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...
Midrand, South Africa
Coupling Decoupling Network M1
The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...
Midrand, South Africa
Midrand, South Africa
Grandway FHP2B04 Optical Power Meter ::: -50 to +26dBm
Optical Power Meter -50 to 26dBm Calibrated wavelength: 850/1300/1310/1490/1550/1625nm | Detector type: InGaAs | Accuracy: ±0.2db±1nW | Resolution: 0.01dB | Linearity: ±5% | Auto power-off: Yes | Back-light: Yes ...
Midrand, South Africa
Astronics R8600 | Radio Test Hub
The R8600 Radio Test Hub is designed to meet the demanding requirements of RF production environments. Able to withstand 150 Watts of continuous RF power input, the R8600 was explicitly engineered to provide a co...
Midrand, South Africa
Chauvin Arnoux PEL103 | Power and Energy Loggers
- Manufacturer: Chauvin Arnoux
Ergonomic, magnetized and suitable for all types of cabinets, PEL103 loggers provide all the power and energy measurements simultaneously.
Midrand, South Africa
Chauvin Arnoux CA6416 Clamp-on Ground Resistance Tester
- Manufacturer: Chauvin Arnoux
Midrand, South Africa
TESCA Sequential Logic Tutor
The Electronic Sequencer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 4 mm brass termin...
Midrand, South Africa
TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F
- Manufacturer: LiSN
The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...
Midrand, South Africa
Snap On 32 mm up to 750 MHz
The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...
Midrand, South Africa
Coupling Decoupling Network M3
The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...
Midrand, South Africa
Dummy Load (-105dBc) Connector: N-M
Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M
Midrand, South Africa