Test, Lab, Medical equipment » Electrical Test Instruments » England

Building Filters

35

Used specification in England, United Kingdom

  • Trusted Seller
    Megger S1-552/2

    Megger S1-552/2

    • Manufacturer: Megger
    • Model: S1-5522

    High Current Insulation Resistance Tester; 5kV The 5 & 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment...

    Harrow, United Kingdom
  • Trusted Seller
    Narda 2270/01

    Narda 2270/01

    • Manufacturer: Narda
    • Model: 227001

    Nardalert S3 Personal Radiation Monitor Key Features: Automatic evaluation of exposure frequencies according to human safety standard LCD on top of casing can be seen at a glance Display of distribution of high a...

    Harrow, United Kingdom
  • Polar Toneohm 700

    Polar Toneohm 700

    • Manufacturer: Polar
    • Model: TONEOHM 700

    Fault Locator Polar Toneohm 700 Fault Locator is a device for short-circuit fault finding on PCBs. In addition to an ohm meter and a DC voltmeter mode, the device can be switched to the current trace mode. Polar ...

    Hounslow, United Kingdom
  • Boonton 57518

    Boonton 57518

    • Manufacturer: Boonton
    • Model: 57518

    Peak Power Sensor, 0.5 - 18 GHz, -50dBm to +20 Boonton 57518 Features Frequency Range: 0.05 to 18 GHz Peak Power Range(For pulse signal only): -40 to +20 dBm CW Power Range: -50 to +20 dBm Ask for Boonton 57518 d...

    Hounslow, United Kingdom
  • Boonton 56518

    Boonton 56518

    • Manufacturer: Boonton
    • Model: 56518

    Peak Power Sensor, 500 MHz to 18.0 GHz, -40 to +20 dBm Boonton 56518 Peak Power Sensor, 500 MHz to 18.0 GHz Boonton 56518 Features Frequency Range: 0.5 - 18 GHz Impedance: 50 ohm RF Connector: N (M) Ask for Boont...

    Hounslow, United Kingdom
  • Agilent Technologies (HP) HP 44431A

    Agilent Technologies (HP) HP 44431A

    • Manufacturer: Agilent - Keysight
    • Model: 44431A

    8 channel Actuator O/P Module with connection assembly The Agilent 44431A 8 channel AC Actuator Module (HP 44431A) provides switch voltages up to 252 Vrms and currents up to 2 amperes. The module is ideal for swi...

    Hounslow, United Kingdom
  • Trusted Seller
    Wavecontrol SMP2 (WSN0001)

    Wavecontrol SMP2 (WSN0001)

    • Manufacturer: Wavecontrol

    SMP2- Electromagnetic Field Strength Meter; 0 Hz to 60 GHz (depending on field probe) The only device that offers genuine 3-in-1 functionalities: broadband measurements (DC to 60 GHz), frequency spectrum analysis...

    Harrow, United Kingdom
  • Trusted Seller
    Keysight Technologies 34938A

    Keysight Technologies 34938A

    • Manufacturer: Agilent - Keysight
    • Model: 34938A

    Switch Module; 20-Channel, 5 Amp, Form A, for the 34980A The Keysight 34938A is a high power general-purpose switch module for the 34980A Multifunction Switch/Measure Unit. It has 20 independent single-pole, sin...

    Harrow, United Kingdom
  • Trusted Seller
    Rohde & Schwarz ESR7 (1316.3003.07)

    Rohde & Schwarz ESR7 (1316.3003.07)

    • Manufacturer: Rohde & Schwarz
    • Model: ESR

    EMI Test Receiver; 9 kHz to 7 GHz The ESR is an EMI test receiver build to measure electromagnetic disturbances using conventional stepped scans or ultrafast FFT based time domain scans. It also functions as a po...

    Harrow, United Kingdom
  • Solartron / Schlumberger 7150

    Solartron / Schlumberger 7150

    • Manufacturer: Solartron

    Digital Multimeter The Solartron 7150 6.5 Digit Multimeter offers all measurement functions plus IEEE-488 are standard in the 7150 providing system and bench performance at low cost. Continuous integration using ...

    Hounslow, United Kingdom
  • Schaffner NSG800 / NSG809

    Schaffner NSG800 / NSG809

    • Manufacturer: Teseq - Schaffner

    High Voltage, Safety and Insulation Testers with plug-in module Schaffner NSG800/NSG809 High Voltage Test System, consisting of the basic unit NSG800 Insulation Tester with Motor-Variac and Schaffner NSG809 stand...

    Hounslow, United Kingdom
  • Anritsu MA2442A

    Anritsu MA2442A

    • Manufacturer: Anritsu
    • Model: MA2442A

    Power Sensor, 10 MHz to 18 GHz Anritsu MA2442A Power Sensor is a high accuracy microwave sensor with frequency range of 10 MHz to 18 GHz for Anritsu ML2400A series MW Power Meter. All MA2400A/B Series Power Senso...

    Hounslow, United Kingdom
  • Anritsu ML2437A

    Anritsu ML2437A

    • Manufacturer: Anritsu
    • Model: ML2437A

    CW Power Meter, 100 kHz to 65 GHz Anritsu ML2437A Power Meter (100 kHz to 65 GHz) combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a singl...

    Hounslow, United Kingdom
  • IFR / Marconi 2610

    IFR / Marconi 2610

    • Manufacturer: Marconi
    • Model: 2610

    True RMS Voltmeter with GP-IB Interface Ther Marconi 2610 True RMS Volmeter (IFR 2610) is a microprocessor based wideband digital voltmeter employing a closed-loop thermal conversion technique to provide accurate...

    Hounslow, United Kingdom
  • T&R TEST LLT-33kV Live Line

    T&R TEST LLT-33kV Live Line Tester Kit

    • Manufacturer: T&R

    Detects HV voltages and compares phasesSelf powered operationIndicates the presence of live voltage on circuits up to 33kVPositive phasing testHigh voltage measurementSuitable for both dry and wet conditionsHigh ...

    Guildford, United Kingdom
123

Overview

Electrical test instruments are essential tools used to test, measure, and diagnose electrical systems and components. These devices are crucial for ensuring the safety, efficiency, and reliability of electrical installations, whether in residential, commercial, or industrial settings. Common types include multimeters, oscilloscopes, and insulation testers.

FAQ

What should I look for when buying used electrical test instruments?

Check the calibration status, overall condition, and whether all necessary accessories are included. It’s also important to verify the instrument's accuracy and functionality.

How can I safely ship electrical test instruments?

Use proper packaging with adequate cushioning to protect the instruments from shocks and vibrations. It's advisable to use a shipping service experienced in handling delicate electronic equipment.

What is the maintenance procedure for electrical test instruments?

Regularly calibrate the instruments to ensure accuracy, clean them to remove dust and debris, and store them in a protective case when not in use. Follow the manufacturer’s guidelines for specific maintenance tasks.