Test, Lab, Medical equipment » Electrical Test Instruments » China

Building Filters

16

Used reference standard in China

DM7276/DM7275 High Precision DC Voltmeter
- Manufacturer: 日置/HIOKI
Introduction: High-precision measurement comparable to that of standard sources, achieving superior temperature characteristics and long-term stability, and high-precision and high-stability measurement through f...
Beijing, China
NRX Absorption RF Power Meter Mainframe
- Manufacturer: 德国罗德与施瓦茨/R&S
Introduction: The NRX can be configured with up to four measurement channels and a wide range of power sensors, making it possible for a single power meter to support both absorption and through-type power sensor...
Beijing, China
NRT through-type power meter
- Manufacturer: 德国罗德与施瓦茨/R&S
Introduction: Reflection power meter with a frequency range of 200kHz to 4GHz; no attenuator is required, and the maximum measured power can reach 2000W; it displays the measured power and reflection simultaneous...
Beijing, China
3561 Battery Tester
- Manufacturer: 德国罗德与施瓦茨/R&S
Introduction: The inspection range covers large battery cells to high-voltage battery packs, and the internal impedance and battery voltage can be measured at high speed. A maximum of 30,000 data can be counted, ...
Beijing, China
GNGPL-UL498 Plugs and Socket Outlets Gauges for UL 498 of American Standard
- Manufacturer: Lisun
Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to UL 498:2012 standards. And the mainly application industries is elect...
Shanghai, China
Agilent 8481A Power Sensor
- Manufacturer: Agilent
• Excellent SWR for reducing mismatch uncertainty • Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) • Compatible with EPM, EPM-P and P-series power meters, plus t...
$400 USD
Suzhou, China
GF302C portable panel power meter calibrator
This device is according to nation verification regulation JJG124-2005 "ammeter, voltmeter, power meter and resistance meter calibration regulations and the relevant countries standard requirements and design thr...
Beijing, China
SUG-CCITT-A Impulse Test Generator
Impulse Test Generator SUG-CCITT-A (Circuit 1, 10/700μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D, Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:...
Shanghai, China
Walk in Chamber for Rapid Rate Temperature / Humidity Test
Relevant standards requirement Temperature shock Test Object: Battery storage pack or system. Li-ion battery pack or system placed in (-40±2) ℃~ (85±2) ℃ alternation temperature, the conversion time of two extrem...
Dongguan, China
PBTS16-120 1-16 Series BMS PCB Board Testing Machine for Battery Pack Assembly
The PBTS series multi-function BMS board testing machine is mainly used to testing the BMS board specifications is within the parameters which declared by the BMS board supplier, so as to provide a set of testing...
Guangzhou, China
PBTS32-120 1-32 Series BMS PCB Board Testing Machine for Battery Pack Assembly
The PBTS series multi-function BMS board testing machine is mainly used to testing the BMS board specifications is within the parameters which declared by the BMS board supplier, so as to provide a set of testing...
Guangzhou, China
PBTS20-120 1-20 Series BMS PCB Board Testing Machine for Battery Pack Assembly
The PBTS series multi-function BMS board testing machine is mainly used to testing the BMS board specifications is within the parameters which declared by the BMS board supplier, so as to provide a set of testing...
Guangzhou, China
PBTS10-120 1-10 Series BMS PCB Board Testing Machine for Battery Pack Assembly
The PBTS series multi-function BMS board testing machine is mainly used to testing the BMS board specifications is within the parameters which declared by the BMS board supplier, so as to provide a set of testing...
Guangzhou, China
PBTS6-120 1-6 Series BMS PCB Board Testing Machine for Battery Pack Assembly
The PBTS series multi-function BMS board testing machine is mainly used to testing the BMS board specifications is within the parameters which declared by the BMS board supplier, so as to provide a set of testing...
Guangzhou, China
PBTS4-120 1-4 Series BMS PCB Board Testing Machine for Battery Pack Assembly
The PBTS series multi-function BMS board testing machine is mainly used to testing the BMS board specifications is within the parameters which declared by the BMS board supplier, so as to provide a set of testing...
Guangzhou, China

12

Overview

Electrical test instruments are essential tools used to test, measure, and diagnose electrical systems and components. These devices are crucial for ensuring the safety, efficiency, and reliability of electrical installations, whether in residential, commercial, or industrial settings. Common types include multimeters, oscilloscopes, and insulation testers.

FAQ

What should I look for when buying used electrical test instruments?

Check the calibration status, overall condition, and whether all necessary accessories are included. It’s also important to verify the instrument's accuracy and functionality.

How can I safely ship electrical test instruments?

Use proper packaging with adequate cushioning to protect the instruments from shocks and vibrations. It's advisable to use a shipping service experienced in handling delicate electronic equipment.

What is the maintenance procedure for electrical test instruments?

Regularly calibrate the instruments to ensure accuracy, clean them to remove dust and debris, and store them in a protective case when not in use. Follow the manufacturer’s guidelines for specific maintenance tasks.