- Trusted Seller
63" EGAN MAYER ROD COATING STATION
- Manufacturer: Egan
63" Egan Mayer rod coater station. Last used in silicone coating line
Wisconsin, USA 
EGAN 3.5″ EXTRUDER 10949
- Manufacturer: Egan
Egan 3.5″ extruder, S/N JO0787808. 100HP 500-Volt DC motor into a belt driven 11.48:1 gearbox 30:1 L/D electrically heated water cooled vented and plugged barrel on a 65″ centerline. Gearbox is rated for 265HP ma...
Elk Grove Village, IL
EGAN 6″ 30:1 L/D 400 18037
- Manufacturer: Egan
One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...
Elk Grove Village, IL
EGAN 3.5″ 32:1 L/D 150 17807
- Manufacturer: Egan
One (1) used 3.5″ 32:1 L/D Egan extruder having an electrically heated, water cooled (closed loop), top vented, and plugged barrel at an approximate 52″ center line height. Philadelphia gearbox has a reduction ra...
Elk Grove Village, IL- Trusted Seller
90" Egan Extrusion Coating Die
- Manufacturer: Egan
Used 90" Egan Extrusion Coating Die. 96" Die Face 48 Die Bolts Previously on an 87" Extrusion Coating Line
EGAN 2515 R. H. -H 100485
- Manufacturer: Egan
1410 INPUT RPM; Hp: 60 | L/d: 24:1 | Qty: 1 | Rpm: 100 | Vented: NO | Cooling: WATER | Voltage: 300/150 | Heat type: ELECTRIC | Gear ratio: 14.06 | Control type: NO | No. of zones: 4 | Screw diameter: 2.5 | Scree...
Cleveland, TX- Trusted Seller
4.5" Crammer Feeder
- Manufacturer: Egan
Used Approximately 4.5" Diameter Egan Crammer Feeder. Including 30HP motor and motor drive. Includes spare auger.
Hainesport, NJ - Trusted Seller
3.5" Egan Powerflight Extruder, 24/1 L/D Ratio, 75hp
- Manufacturer: Egan
Used 3.5" Egan Powerflight Extruder, 24/1 L/D Ratio, 75hp DC Motor, 1750 RPM, With Saftronics Drive, Belt Driven, 4 Zones Water Cooled Barrel, 6 Barber Colman AT580 Temperature Controls, Mercury Relays, Rpm and A...
United States - Trusted Seller
63" EGAN MAYER ROD COATING STATION
- Manufacturer: Egan
- Trusted Seller
1991 3 layers EGAN Cast film extrusion line
- Manufacturer: Egan
Cast film extrusion lines are commonly used to extrude plastic films especially for flexible packaging industry. / In a cast film extruder PE, PP or PA granulates (or other polymers) are melted inro an extruder a...
Negrar di Valpolicella, Italy EGAN MODEL #CA71-24S DIGITAL FEEDER: STOCK #16945
- Manufacturer: Egan
Stock#: 16945 | Feed length: 2" - 999.999" | Capacity: 24" x .075", 12" x .187" MAX | Minimum width: 5" WITH HOLD DOWN | Maximum width: 54" x .040" | Passline height: 55" | Built for: 35 SPM PRESS
Holland, OH
Tip: Enter manufacturer, model or keyword
