Used Processing in Victoria, Australia

SHARPLES PM35000
- Manufacturer: Sharples
- Model: PM35000
Used - Sharples PM-35000 Super-D-Canter Centrifuge. Stainless steel construction on product contact areas. Max bowl speed 3150 rpm, 360 degree solids discharge ports with tungsten carbide wear protection inserts...
Melbourne, Australia
Cleated Conveyor
Incline cleated conveyor 3m long x 400mm wide Cleats with sidewalls. Runs at 1m per 3 seconds. It takes 9 seconds for an item to travel the length of the belt. Runs well, 415V 3 phase power.
Melbourne, Australia
Air Receiver
Heavy Duty Air Receiver Test Pressure 900 kpa Design Pressure 1050kpa. Temp Rating 120c 750mm dia x 2150 straight side Overall height 2850 mm
Melbourne, Australia
St/Steel Tank
- Capacity: 1,200 liter
Open top 1200Litre St/Steel tank Centre bottom discharge to a 2inch valve with CamLock fitting Side mounted Agitator, 1.5kw 415V Fork Lift Tynes on the side of the tank 1850mm dia x 900mm deep.
Melbourne, Australia
INVICTA 110 x 90
- Manufacturer: Invicta
Heavy duty Vibrating Table fitted with 2 vibrating motors. Mounted on springs with adjustable angles for the motors. Table size is 1100mm x 900mm Each motor is an INVICTA 2685Watts, 44145 Force (N), 5.1amp, 415V ...
Melbourne, Australia
CTS CTS 15
- Manufacturer: CTS
CTS 15 litre high speed mixer. Stainless steel internal bowl. Jacketed bowl with Grant hot oil boiler 240volt single phase, 2.2kw Baldor DC variable speed drive Last used to mix plastics.
Melbourne, Australia
MINIPACK FM76
- Manufacturer: Minipack - Torre
- Model: FM76
Minipack FM76 Shrink Wrapper. Single phase 240V. Frame has casters.
Melbourne, Australia
F.A.MAKER 1000L SS
- Manufacturer: F.A.MAKER
NEW - 1000L Stainless steel ribbon blender with double helix ribbon for more efficient mixing. - Max working volume 1000 Litres - Total volume 1250 Litres - 3 Phase, 415V, 11kW Drive Full specifications of blende...
Melbourne, Australia
JACMOR ENGINEERING 5.8 x 250
- Manufacturer: JACMOR ENGINEERING
Mild steel pipe type screw conveyor. Heavy duty 7 mm Screw thickness. 200mm screw pitch 250mm diam x 5.8m long 4kw SEW 222 rpm. Drive 415v. Last used on Gypsum.
Melbourne, Australia
SS 1000
- Manufacturer: SS
- Capacity: 1,000 liter
Stainless steel insulated tank with electric heating. (SS316) 1000L Volume. Sloped bottom to a 1.5 inch outlet. Stainless steel frame. Triple heating element. 3 Phase, 415V, 20.9A, 15kW. Half moon hinged lid. Tem...
Melbourne, Australia
SEW 3.1 X 0.35
- Manufacturer: SEW-Eurodrive
Flat belt, slat conveyor, 3.0m long x 420mm wide. Fitted with SEW geared motor drive, 415V, 0.75kW Stainless steel frame, last used to move beverage bottles. Speed 48 Metres/min Runs well.
Melbourne, Australia
SEW 3.0 X 0.42
- Manufacturer: SEW-Eurodrive
Flat belt conveyor. Stainless steel frame. Three belts. Belt total length 3000mm, total width 420mm. 3 Phase, 415V, 0.75kW Sew geared motor. Unit runs well. Some slight knocks and stains to conveyor but overall u...
Melbourne, Australia
Flat Belt Conveyor
Flat belt conveyor. Mild steel construction. Unit has no drive however one can be installed if required. Unit is in good condition. Ex chocolate factory.
Melbourne, Australia
LANFRANCHI 5.5
- Manufacturer: LANFRANCHI
Vacuum Conveyor Fan with Stainless Enclosure. 220mm Suction Inlet. Flow rate 25-80 m3 /min Pressure 460-305 kgf/m2. 5.5kw 2880rpm 415v 50/60hz. Fan Cimme Italy. Unit supplied by Lanfranchi Italy.
Melbourne, Australia
Stainless Steel Conveyor
Stainless steel flat belt conveyor. Unit in ok condition and runs well.
Melbourne, Australia