Used Processing in Flanders, Belgium

1978 Arvor 872 BB

• Manufacturer: Arvor

Bottom seal machine with flying knife Unwind stand with mechanical shaft + cones + mechanical brake system Adjustable roller system to position the print (offset system) Photocell for printed film Clutch and brak...

1987 Kiefel Rotex 30 S

• Manufacturer: Kiefel

Blown film extruder For the production of LDPE – MDPE & LLDPE film The extruder and rotating film blowing head are mounted in the top of the tower The film is blown from the top of the tower to the winder on the ...

1994 Stiegler US-S 800

• Manufacturer: Stiegler

Side sealing machine 380 V, 50 Hz Servo motor for bag feeding (original servo system made by Stiegler) Sealing bar for PP and thin LDPE equiped with thermocouple Sick photocell for printed film 2 x Stiegler perfo...

1974 Arvor 872 GL

• Manufacturer: Arvor

Bottom seal machine with flying knife Unwind stand with 2 positions and 2 shaft of 25mm + 4 cones Sealing bar and flying knife in good condition Clutch and brake in good condition All rubber rollers in good condi...

1982 Hudson Sharp MS 750

• Manufacturer: Hudson-Sharp
• Model: MS 750

Side seal machine renewed in 2015 Completely mechanical and electrically overhauled & renewed in 2015 3x400V, 50Hz Scae unwind shaft driven, 140cm wide Air shaft 76mm with 2 safety Boschert chucks 4 roll dancer t...

2013 Clint CWW/K/WP 453-P water cooled liquid chiller

• Manufacturer: Clint
• Model: CWW

NEW !! Never been used. Clint CWW/K/WP 453-P Cold carrier: Water | Cooling agent: R410A | Cooling power: 149,5 KW | Temperature of condensation: 30/35 degrees C | Temperature of the cold carrier: 7/12 degrees C |...

Plast-Control Magicflow K400

• Manufacturer: Plast-Control
• Model: Magicflow

1998 Macchi ES 65 / 30 Plastex 5 layer extruder

• Manufacturer: Macchi

Only hot section available 5 extruders with Plast control dosing equipment Extrusion head No control, no electrical cabinet.

1970 Stiegler T800

• Manufacturer: Stiegler
• Model: T800

Side sealing machine Clutch and brake machine Sealing bar for LDPE & PP Stacking table unwind

1967 Stiegler TS800

• Manufacturer: Stiegler
• Model: TS800

Side sealing machine 380 V 50 Hz 2,5 kW Unwind stand in line with 2 positions + 2 mechanical shafts Clutch and brake 1 side seal bar for LDPE 1 side seal bar for PP (polypropylene) Pick off section Stacking table

Dust extraction DUSTY TT1020

. length: 120 cm | . width: 7.5 cm | . thickness: 2.5 cm | Supply voltage: 165-260 V AC | Power: 36W | Light intensity: 3600 lm | Lifespan: up to 50,000 hours | Starting price per piece: €3.70 | Dust extractionm...

Kutahya Marea White Polished 60x120 cm Tile 120.96 m²

Go to our auction page for more information

Natural Stone Marble Champagne Polished 30.5x30.5 cm Tile 66 m²

Go to our auction page for more information

Kutahya Delmar Polished 60x120 cm Tile 181.44 m²

Go to our auction page for more information