Used analysis

Dynamic friction in pin – disk (TM 260.03)

frictional forces between two sliding friction pairs Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems. ...

Mechanical Testing Machine

• Manufacturer: Hongjin

Features of Tape peel strength tester 1.7-inch LCD screen, stylish man-machine interface, display real-time measurement data, change curve and test results 2. The screw drive system greatly improves the accuracy ...

Standard Electromagnetic Vibrator

• Manufacturer: King Design Industrial

KD-9363-EM Standard Electromagnetic Vibrator Description The purpose of vibration testing is to make a series of controllable vibration simulation in lab, no matter generated by natural or man-made vibration envi...

AG49 Automatic Fabric Drapability Tester

• Manufacturer: Aveno

Automatic Fabric Drapability Tester is used to determine the dynamic and static drape performance indicators of various fabrics: drape coefficient, liveness rate, curved surface ripple and aesthetic coefficient. ...

Assembly data acquisition for materials tester (MT 190.01)

• Manufacturer: Labequip

interdisciplinary and interlinking kit from the fields of mechanics and electronics Description: The MT 190.01unit is supplied as a kit and contains all components and materials to build a professional data acqui...

Rolling friction in friction wheels (TM 260.01)

frictional forces between two rolling friction wheels Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems....

Dynamic friction in cylindrical pin – roller (TM 260.05)

frictional forces between two sliding friction pairs Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems. ...

Journal bearing with hydrodynamic lubrication (TM 290)

frictional moment under different bearing clearances and loads Description: In hydrodynamic bearings, the shaft and the bearing shell are separated from each other during operation by a supporting lubricating fil...

QC-639V/W Impact Tester Digital Type Confirm to ASTM D256、ASTM D6110、ISO179、ISO180、ISO13802 Standard

• Manufacturer: cometech testing machines

Impact Tester Digital Type can measure the impact resistance of polymer materials. It calculates the absorbed impact energy based on the energy conversion relation. The precision of the impact hammer will highly ...

Incubator

Plant Growth Chamber is suitable for environmental protection, health and epidemic prevention, drug testing, agriculture and animals, aquatic research, institutions, production departments, water body analysis an...

Crack detection in rotating shaft kit (PT 500.11)

• Manufacturer: Labequip

vibration behaviour of shaft with radial crack Description: Cracks due to material fatigue are very dangerous for rotating machines. Early detection of any crack is therefore essential before permanent rupture an...

QC-526D2 Universal Testing Machine Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard

Universal Material Testing Machine QC-526D2 is a table-type tensile testing machine with a big test space and long stroke, the max. capacity is 20kN. It's suitable for testing huge samples, and the new function e...

Testing Instruments

• Manufacturer: Hongjin

Parameters of Frame front fork fatigue testing machine Capacity(kgf) 500kgf x 1 set load cell resolution 1/10.000 Displacement sensor range 0-125mm Power source Electric cylinder servo control system Software int...

Motor Twist Counter for yarn, Manual twist counter for yarn Confirm to ISO 2061 ASTM D1422 BS-903 FZ-T10001 JIS L1095 Standard

• Manufacturer: cometech testing machines

This test machine uses the characteristics of different length of yarn after twisting. Use the pointer or sensor to detect changes in the yarn to figure the twist value of the measured object. This is a very impo...

QC-526M1F Universal Materials Testing Machines Confirm to ISO 7500-1, ASTM E4, ASTM D-76, DIN5122, JIS B7721/B7733, EN 1002-2, BS1610, GB T228 Standard

Universal Material Testing Machine QC-526M1F have a practical test space and stroke. The tensile testing machine is equipped with servo motor and ball screw with maximum capacity 20KN. Test stroke varies from the...