Building Filters

Used Automatic Lathes in Japan

B0125C/B0126C
- new
Compact type with reduced depth is added to the B012 series Rear spindle and turret allow overlap machining of front and rear surfaces. Compact design with minimal overhang. Depth is reduced by 39% compared to co...
Tokyo, Japan
B0123C
- new
Compact type with reduced depth is added to the B012 series lineup Compact design with minimal overhang. Depth is reduced by 39% compared to conventional models. Maximum rotational speed of 8,000 min -1 The front...
Tokyo, Japan
B073-VR/B075-VR
- new
Ideal for machining high-precision micro parts such as communication connectors and clock parts Instead of a toggle, Tsugami's original chuck opening/closing mechanism with superior response and balance character...
Tokyo, Japan
B0123-VR/B0203-VR
- new
High-precision machining with a structure that is faithful to the basics Basic machine with small investment and large profit ●High output built-in motor is used for the main spindle to enhance machining capacity...
Tokyo, Japan
C200 Machinery
- new
Compact specifications for high-precision finishing machine Highly rigid sliding guideway on the X-axis absorbs heavy cutting loads and ensures stable machining accuracy. Pre-tensioned ball screw suppresses therm...
Tokyo, Japan
B073C/B075C
- new
Compact type with reduced depth is added to the B07 series lineup Compact design with minimal overhang. Depth reduced by 39% compared to conventional models. Instead of a toggle mechanism, Tsugami's unique chuck ...
Tokyo, Japan
B0125-VR/B0205-VR/B0126-VR/B0206-VR
- new
Rear spindle and rear turret enable overlap machining Compact machine equipped with a rear turret with Y-axis Improved multi-tasking capability on the back side (B0126-VR/B0206-VR) High power built-in motors are ...
Tokyo, Japan
P036W/P056W
- new
Highly Acclaimed High Precision Machining Machine for Micro Precision Parts Independent opposed turret specification of the P0 series ●Machining time is shortened by the high-speed spindle and optimum cutting spe...
Tokyo, Japan
2006 HOWA OHKUMA 2SP-10HG
- used
- Manufacturer: Okuma
- Model: 2SP-10HG
Distance between both spindles: 310mm,. Max. machining: ø100*100mm, Main spindle through-hole diameter: φ52mm 50～5000rpm, S:(X)150*(Z)175mm In case of any discrepancy between the description and the actual produc...
Toyohashi, Japan
2017 DMG Mori Seiki AA-1
- used
- Manufacturer: DMG Mori
Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...
Toyohashi, Japan
2017 DMG Mori Seiki AA-1
- used
- Manufacturer: DMG Mori
Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...
Toyohashi, Japan
1998 Takizawa Ironworks TAC510×1000
- used
- Manufacturer: Takizawa Iron Works
FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...
Toyohashi, Japan
2002 Techno Washino C3
- used
- Manufacturer: Washino
- Model: C3
FANUC-21i-T,. Swing over bed: 550mm dia. Distance between centers:800mm,,. S:X340*Z650mm, 23～1800rpm(16steps), With 3-jaw 12-inch chuck (Kitagawa JN12T) In case of any discrepancy between the description and the ...
Toyohashi, Japan
2004 Dainichi Metal Industry DL530×150
- used
- Manufacturer: Dainichi
- Model: DL530150
Not available for test run due to undergoing repair and maintenance FANUC-20iT,. Swing on bed: 530mm, Swing on reciprocating table: 300mm, Swing on bed: 530mm, Swing on reciprocating table: 530mm Swing on the rec...
Toyohashi, Japan
2014 Takamatsu XW130
- used
- Manufacturer: Takamatsu
FANUC 0i-TD,. Max. processing: 280*155mm dia. Swing: 250mm dia. Main spindle through-hole diameter: φ61mm, 4000rpm 4000rpm, S:X150*Z150mm S:X150*Z160mm, 8-inch chuck, 8 square turrets Each octagonal turret, with ...
Toyohashi, Japan