Building Filters
2007 SANDVIK D25KW CRAWLER DRILL RIG #9963Ta
- Manufacturer: Sandvik
Manufactured 2007, drills 5” to 6-3/4” diameter up to 88’ Price: $195,000 GARDNER DENVER 40T BLAST HOLE RIG
1972 PORTADRILL 12TK DRILL RIG #3369Ta
- Manufacturer: Portadrill
Manufactured 1972, Detroit 318 engine, 7-1/2” retractable table, 4” x 36’ kelly, chain pulldown, mounted on International 4900 tandem axle truck with 466 DT engine, 10 speed transmission, 400’ of 4-1/2” x 20’ (3-...
1997 INGERSOLL-RAND DML1200
- Manufacturer: Ingersoll Rand
- Model: DM-L 1200
- Hours: 1,355 h
1997 Ingersoll-Rand DML-LP 1200 S/N 7302 Cummins, A/C cab, 35 ft mast, 30 ft drill stem, dust collector, carousel, auto rod changer, 1200 cfm x 110 psi air comp, hyd stabilizers, fire suppression, fast fuel Just ...
UNIFLEX DRILLING RIG PACKAGE #4478T
102’ x 250,000# Uniflex telescoping derrick, substructure, catwalk, V-door, 60 Series Detroit engine, upper doghouse/water tank combo, combination shack with tool room/change room and (2) 100kva genset, mud tank ...
1969 CME 55 AUGER DRILL RIG #8357T
Manufactured 1969, gas deck engine, in/out and side to side slide base, cathead, no auto hammer, mounted on 1985 Ford F700 2WD truck with gas engine, manual transmission, no angle capability, no auto hammer, auge...
1977 INGERSOLL RAND T4W DRILL RIG #3552T
- Manufacturer: Ingersoll Rand
- Model: T4W
Manufactured 1977, no air compressor mounted on rig (cooler and piping still on rig), Detroit 8V71 deck engine, mounted on Crane Carrier with 6V53 Detroit engine, traction tires on rear and floatation tires on fr...
1986 CME 55 AUGER DRILL RIG #8070Ta
Manufactured 1986, mounted on 2008 Freightliner M2 4x3 truck with approx 141,000 miles, in/out slide base, Moyno 3L6 pump, cathead, 140/300# auto hammer, 28’ long derrick, 3200# winch, Ford 300 ci deck engine, 75...
SPEEDSTAR 55 CABLE TOOL DRILL RIG #8944Tb
3 lines, 36’ mast, International 123 gas engine, mounted on 1978 International truck with Cummins diesel engine, 2 rear mechanical leveling jacks Price: $16,500 - Michigan SPEEDSTAR 55
SPEEDSTAR 71 CABLE TOOL DRILL RIG #3925T
Continental 122 engine on deck (won’t start), mounted on 1970 International truck with gas engine, new batteries, new belts, 2 rear jacks, 1 stem, 8” bit, 2 jars, 3 bailers, fishing tools Price: $35,000 – Souther...
1991 CME 45 AUGER DRILL RIG #10832T
Manufactured 1991, diesel deck engine, mounted on 991 Ford Superduty with diesel engine, in-out slide base, water truck, 3 winches, no angle capability, 2 rear hydraulic leveling jacks Price: $57,500
1980 CME 55 AUGER DRILL RIG #10556T
Manufactured 1980, Ford 6 cylinder engine (rebuilt – 0 hours), Moyno 3L6 pump rercently replaced, all hydraulic pumps rebuilt, feed table rebuilt 4 bearing, chain square drive. Auto hammer rebuilt, new hydraulic ...
2016 CME 55 AUGER DRILL RIG #10551Td
Manufactured 2016, 8000 hours, mounted on 1995 Morooka 1100 (6300 hours) Price: $250,000 USD CME 55HT
1985 CME 55 AUGER DRILL RIG #3744T
Manufactured 1985, approx 2350 hours, Cummins 71hp engine, mounted on 2000 Ford F650 with diesel engine, approx 45,000 miles, (13) 5’ x 8” sections, (13) 5’ x 6” sections Price: $82,500
1985 CME 550 ATV DRILL RIG #10346T
Manufactured 1985, engine was replaced with a new engine in 2023, completely rewired, started replaced 2024, brakes were removed in preparation for replacement (new brake equipment not yet installed), clutch need...
1987 CME 55 AUGER DRILL RIG #3853Ta
Manufactured 1987, 6 cyl Ford gas engine on deck, mounted on 1987 Single axle International truck with diesel engine, Beam pump, drop hammer, cathead, rebuilt transmission and rear end, 60+' of 4-1/4" Acker auger...
Tamrock Commando 300 Drilling Rig
- Manufacturer: Tamrock
- Model: Commando 300
Good condition Tamrock Commando 300 Drilling Rigs available between 1999 and 2012 years. Located in USA and other countries. Click request price for more information.
USA