- Trusted Seller
2004 Hydro-Chem SMR 80,000 scfh
used
- Manufacturer: Hydro-Chem
Hydro-Chem hydrogen gas plant. Capacity 1.9 MMSCFD (80,000 scfh or 2100 Nm3/hr). Built 2004, in operation until 2021. Was idled with nitrogen blanket on gas side until removed in 2021. Has 20 tube reformer (t...
Texas, USA - Trusted Seller
2.4 Sq Meter Rosenmond Nutsche Filter, 316 S/S
used
- Manufacturer: Rosenmund
2.4 Sq Meter Rosenmond Nutsche Filter, 316 S/S Used Rosenmund agitated nutsche Filter/Dryer, 2.4 square meter surface area, 316 stainless steel construction, rated 50 PSI and full vacuum internal at 302 degrees F...
Texas, USA 
COLUMNS 60576-2
used
- Manufacturer: HYDRO CHEM PROCESSING
HYDROGEN PURIFICATION ABSORBER; 22" SKIRT; W/ CARBON PACKING; MFG BY HYDRO CHEM PROCESSING; 1/4" THK; FLANGED TOP NOZZLE; ...
Cleveland, TX
1985 SHM 1400 55" Wide Fixed Bed Sheeter
used
Single Shaft Unwind Upgraded gear box 48-inch (1200 mm) Pile height Sheet Width 55-inch (1400mm) inch maximum Sheet Length 60-inch (1575mm) maximum (3) Tidland Slitters Rated to 1000 FPM (335m/min) maximum mechan...
Dallas, TX
2006 Nordmecccanica Super Simplex SL1400 Solventless Laminator
used
56” (1430mm) Max web width 40” (1000mm) Unwind/Rewind
Dallas, TX
2005 Uteco Horizon 130 Laminator
used
- Manufacturer: Uteco
NEW ELECTRONICS IN 2022 52” Wide single pass laminator Water based and solvent based Rated to 1000 FPM 40” Diameter Turret Unwind, 32” Diameter Turret Rewind, 3” & 6” Cores, (2) Enercon corona treaters, Smoothing...
Dallas, TX
1994 SHM 1400 DK CTR 55" Wide Sheeter
used
Single shaft unwind Max web width: 55" | Cut off range: 16" - 55" | Max knife load multiple webs: 500 gm/m2 | Max knife load single web: 400 gm/m2 | Pile height max: 47" | Pile weight max with pallet: 3300lbs
Dallas, TX
2005 Nordemeccanica Super Simplex 1500 Laminator
used
Rated to 1400 FPM 1500mm Wide Servo driven unwinds and rewind 40" Unwind, Enercon Treater, Auto Adhesive tank filling, Dancer assemblies on unwinds and rewinds, Edge guides on unwinds and rewinds, Temperature con...
Dallas, TX
Dallas, TX
Mercury Zerand 45" Web-fed Platen Die Cutter
used
- Manufacturer: Mercury
44" Maximum Width X 36" Long Zerand 60” Turret Unwind, Decurling Roll Stand Backstand, GWD Web Guide, Intermediate Roll Clamp, Takeaway Conveyor, Stacking Table, 27" x 17" Trim Removal Belt Conveyor include die ...
Dallas, TX
AUTOFOLD AF 516 SEE COIL LINE
new
- Manufacturer: Advanced Cutting System
AUTOFOLD AF 516 SEE (LEFT OR RIGHT FEED AVAILBLE) The original Autofold system is the backbone of the Autofold production due to its design and the use of the best material’s in manufacture ,all Autofold machines...
Ennis, TX- Trusted Seller
Anderson 33 Super Duo Expeller Press
used
- Manufacturer: Anderson
Used As-Is, 33 Super Duo Expeller Presses These high-quality presses are an excellent investment for processing businesses looking to increase their productivity and efficiency. Available for Immediate Delivery...
Fort Worth, TX - Trusted Seller
Bajaj Impco Decorticators
used
- Manufacturer: Impco
(2) Used As-Is, Bajaj Impco Decorticators & Accessories Available for Immediate Delivery ***Inspection is Recommended, Equipment is being offered, Used “As Is” without warranty and subject to prior sale***
Fort Worth, TX - Trusted Seller
Carver HE-200 Delinter
used
- Manufacturer: Carver
Carver Model HE-200 Saw Delinter Comes with (200) 18" diameter saws. The saw and brush cylinders include replaceable stub shafts to reduce cost and delivery. Available for Immediate Delivery ***Inspection is ...
Fort Worth, TX - Trusted Seller
$895 USDElgin, TX 
Ingersoll Rand T30 Industrial Compressor
used
- Manufacturer: Ingersoll Rand
- Model: T30
Good condition Ingersoll Rand T30 Industrial Compressors available between 1974 and 2005 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword