Building Filters
- Trusted Seller
CNC horizontal turning center Doosan LYNX 220 B with bar feeder and tailstock
- Manufacturer: Doosan
- Model: LYNX 220B
CNC horizontal turning center Doosan LYNX 220 B with bar feeder and tailstock Manufacturer: Doosan Type: LYNX 220 B Year of manufacture: 2003 Control system: Doosan Fanuc max. turning length 305 mm max. tur...
Jirkov, Czech Republic - Trusted Seller
Doosan Puma 2100 MS I CNC Lathe I 2013
- Manufacturer: Doosan
- Model: PUMA 2100MS
Discover offering this pre-owned Doosan Puma 2100 MS CNC Lathe, manufactured in 2013 and currently located in Czech Republic. This high-performance CNC lathe is equipped with a Doosan-Fanuc i Series control unit ...
Czechia - Trusted Seller
2016 DOOSAN PUMA TT 1800 SY
- Manufacturer: Doosan
- Model: PUMA TT1800SY
- Spindle bore: 105 mm
4-axis cnc lathe Doosan Puma TT 1800 SY has 2 spindles, 2 heads and Y-axis. With Fanuc 31i-B control system. It is offered including a 1.5m bar feeder - type Spacesaver 2500. The machine is in good technical cond...
Prague, Czech Republic - Trusted Seller
VMC DOOSAN DNM5700 – yop 2021
- Manufacturer: Doosan
Number of machining axes (without parallel axes) 3 of which parallel CNC axes 3 X-axis travel 1050 mm Y-axis travel 570 mm Z-axis travel 510 mm TABLE Clamping surface (left-right) 1300 mm Clamping surface (front-...
Prague, Czech Republic - Trusted Seller
2013 DOOSAN PUMA TT 1800 SY
- Manufacturer: Doosan
- Model: PUMA TT1800SY
- Spindle bore: 105 mm
The Doosan Puma TT 1800 SY lathe is in good technical condition. In operation since the end of 2014. Can be seen by agreement, disconnected. It is offered including the SS 2500 feeder.
Prague, Czech Republic - Trusted Seller
CNC lathe Doosan Lynx 220 LS, year 2012
- Manufacturer: Doosan
- Model: LYNX 220LS
Fanuc-i control system. A lathe does not have driven tools, it has a counterspindle. circulating diameter above bed 600 mm circulating diameter above the support 400 mm max. machining diameter 525 mm max. machini...
Prague, Czech Republic - Trusted Seller
2008 DOOSAN Puma TT1800SY
- Manufacturer: Doosan
- Model: PUMA TT1800SY
This 6-axis DOOSAN Puma TT1800SY was manufactured in 2008. It features a spindle rpm of 5000, a maximum distance between spindle noses of 980 mm, and a bar capacity of 65 mm. It includes a 210 mm diameter 3-jaw c...
Czechia - Trusted Seller
2023 Doosan M0617
- Manufacturer: Doosan
- Model: M0617
- no. of axis: 6 axis
Number of axes: 6 pcs | Maximum lifting capacity: 6 kg | Source: Phoenix XQ400 C puls | Tipping: 2700 mm | Operating range: 360 | Robot reach: 1700 mm | Machine weight: 34 kg
Brno, Czech Republic - Trusted Seller
2011 Doosan LYNX 300
- Manufacturer: Doosan
- Model: LYNX 300
- Spindle bore: 76 mm
Turn table diameter: 450 mm | Sloping bed: YES | Spindle bore: 76 mm | Driven tools: NO
Brno, Czech Republic - Trusted Seller
2014 Doosan MYNX 7500
- Manufacturer: Doosan
- Model: MYNX 7500
- Spindle taper: BT 40
The machine is in excellent technical condition. Control system fanuc: i Series | Clamping area of table: 1600x750 mm | Travel x-axis: 1525 mm | Travel y-axis: 762 mm | Travel z-axis: 625 mm | Spindle speed: 1 - ...
Brno, Czech Republic - Trusted Seller
2010 DOOSAN DNM 400
- Manufacturer: Doosan
- Model: DNM 400
4th axis is not part of the offer Control system: Fanuc | Total hours: 103042 h | Hours on: 7915 h | Length of the working table: 920 mm | Width of the working table: 435 mm | X-axis travels: 762 mm | Y-axis trav...
Brno, Czech Republic - Trusted Seller
2016 Doosan DNM 4500
- Manufacturer: Doosan
- Model: DNM 4500
- Spindle taper: BT 40
The machine is in good technical condition, under power. Chip conveyor is included.
Brno, Czech Republic - Trusted Seller
2012 Doosan HM 8000
- Manufacturer: Doosan
- Model: HM 8000
The machine is in good technical condition, under power, after agreement is possible to test it.
Brno, Czech Republic - Trusted Seller
2006 Doosan LYNX 220
- Manufacturer: Doosan
- Model: LYNX 220
- Spindle bore: 45 mm
The machine is in good technical condition, under power, after agreement is possible to test it.
Brno, Czech Republic - Trusted Seller
2016 Doosan VM 960L
- Manufacturer: Doosan
- Model: VM 960L
- Spindle taper: ISO 50
The machine is in good condition and can be retested by arrangement.
Brno, Czech Republic 
Doosan DNM 650 Machining Center
- Manufacturer: Doosan
- Model: DNM 650
Good condition Doosan DNM 650 Machining Centers available between 2008 and 2012 years. Located in Netherlands and other countries. Click request price for more information.
Netherlands