Used Donau Machine Tools

DONAU DR-13 #0103722

• Manufacturer: Donau

Travel of arm: 16" | Travel of head: 0" - 16" | Distance from spindle @ top: 25" | Distance from spindle @ bottom: 9-1/2" | Spindle speeds: 200-100 LOW, 600-3400 HIGH | Feedrate: MANUAL | Table size: 36" X 24" |...

DONAU DR-32

• Manufacturer: Donau
• Arm extended: 914.4000000000001 millimeter

MODEL DR32 DONAU RAPID RADIAL DRILLING MACHINE Specifications: Arm Length: 920 mm Feed Range: 0.075-0.3 mm/min Feed Steps: 3 Quill Stroke: 190 mm Table Surface Area: 1230 x 500 mm Turning Speed Range: 40 Total P...

Donau DR23

• Manufacturer: Donau
• Model: DR23

Max. drilling capacity: 28 | Recording (mk): MK3 | Min. speed: 70 | Max. speed: 1550 | Drilling depth: 130 | Weight: 1900 | Connection voltage: 400 | Abb inverter acs800 series inverter acs800-07p unidad princip...

DONAU clamping table

• Manufacturer: Donau

Clamping table, clamping plate, machine table DONAU Clamping table 1060 x 400 mm Additional table for DONAU DR40 DIGI used, tested !

1962 DONAU high-speed radial drilling machine - DR30 29724

• Manufacturer: Donau

High-speed radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, high-speed radial drilling machine

DONAU radial drilling machine

• Manufacturer: Donau

High-speed radial drilling machine, radial drilling machine, high-speed radials DONAU Swivel and boom in out pneumatically braked ! 380 V used, tested !

DONAU radial drilling machine

• Manufacturer: Donau

High-speed radial drilling machine, radial drilling machine, high-speed radials DONAU DR13B Height adjustment of swivel arm defective ! 380 V used, checked !

1980 DONAU-KNAPP UZFM - V 300 H

• Manufacturer: Donau

hydraulic automatic rack milling machine with clamping device automatic milling sequence control via cam field on the milling head slide and on the table slide with the possibility of snap action ( = aut. bridgin...

Donau DR 23 - high-speed radial drilling machine

• Manufacturer: Donau

Donau DR 23 - High-Speed Radial Drilling Machine -Drilling capacity / steel approx. 28 mm -Thrust approx. 700 mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3 mm -Drilling depth 130 m...

DONAU DR 40z high-speed radial drilling machine

• Manufacturer: Donau

DONAU DR 40z High-Speed Radial Drill Technical Specifications: - Drilling capacity into solid ST 60 steel: 40 mm - 18 spindle speeds: 35–1800 rpm - Drill feed rates: 0.075–0.60 mm/rev - Drill column height adjust...

DONAU DR 23 high-speed radial drilling machine

• Manufacturer: Donau

Drilling capacity in steel 30 mm Thread cutting device Mechanical feed Clamping surface table 1050 mm x 400 mm Spindle mount MK 3 Machine light Coolant device Rotary table 0 250 mm with indexing plates Machine vi...

1990 DONAU-KNAPP UZFM-V 300 H-CNC

• Manufacturer: Donau

CNC controlled rack milling machine, SIEMENS 810 M SIEMENS CNC control model M 810 for the partial axis ( X ), so that a quick quick changeover of the machine is possible without change gears. Dividing steps 0,00...

Donau DR23 Radial Head Tap & Drill on Fixed Bed

• Manufacturer: Donau

Donau DR23 Radial Head Tap & Drill on Fixed Bed, Table Size 1070 x 400mm, 3MT Spindle Taper, Spindle Speeds 70 - 1550rpm, Power Rise & Fall Head, Power Feed 0.075 - 30 Per Rev. S/No. 2087-5 - No CE Mark, Terms & ...

1987 DONAU CNC 50 MS CNC HEIDENHAIN TNC 151

• Manufacturer: Donau

Rapid radial machine Danube

• Manufacturer: Donau

Drilling vice and drillchuck This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.