Used Machine Tools in Nuevo León, Mexico

KTM 5AVK-F

Hardened and ground table 13 x 59 inches. Super-precision, oversized recirculating ball screws with stainless steel telescopic covers on the X and Y axes, driven by a DC servo motor. Ground milling head with prec...

KTM 3VKF

Motor power: 3 HP, 50 ± 4500 RPM, variable speed via a frequency inverter, allowing us to go from 0 to maximum revolutions in 3 seconds. 10 x 50 hardened and ground table. T-slots. Precision hardened and ground s...

KTM 3S

Motor power: 3 HP, 16 speeds with belt change. 9" x 42" hardened and ground table. T-slots. Precision hardened and ground spindles with double nuts for wear compensation. Meehanite casting with built-in coolant r...

JHU 35100H/NC

Nitride hardened, super finished power. Variable speed workhead rotates 90° CCW and 30° CW. Rapid feed and retraction of the wheel head allows for faster setup and verification of grinding dimensions. Hydraulical...

KVTC 2260/50

Large working capacity of up to 126″ x 28″ x 24″ travels and 138″ x 24″ table. Powerful 25HP spindle motor with up to 12,000 RPM with spindle cooling system. Fanuc AICC-NANO high speed contour control. Fanuc "i" ...

KVTC 2260/40

Large working capacity of up to 126 x 28 x 24 inches of travel and a 138 x 24 inch table. Powerful 25 HP spindle motor with up to 12,000 RPM with spindle cooling system. Fanuc AICC-NANO high-speed contour control...

KHV 400

S 1500

10 HP AC spindle motor. Meehanite GB300 casting for superior rigidity. Hardened and ground square shapes on the Y and Z axes. Hardened and ground table and dovetail shapes. Precision spindles on the X, Y, and Z a...

TLC-125 BUFFALO BRAND HAND HELD PILLAR DRILL

• Manufacturer: Buffalo

BUFFALO (USA) Manual Column Drill No. 16, MT3 cone, 24" x 26.5" table, 5 Speed (400 - 3000 RPM), maximum height under head 22", 3/4 HP motor, s/n. 5410072

TLC-119 SATURNO BRAND 5/8" MANUAL BENCH DRILL

SATURNO (China) Manual bench drill press model ZJ4116, MT2 cone, 5/8" capacity, Speeds: 210 - 3700 RPM, 11" x 11" table, 3/4 HP three-phase motor

TLC-137 PILLAR DRILL, MODEL BC80, CONE MT5, BRAND WMW HECKERT

• Manufacturer: Heckert

WMW HECKERT(Germany) Column drill, model BC80, taper MT5, table 20" x 24", 15" throat, 48" under tool, 12 Vel (38 - 1680 RPM), motor 12 Kw, s/n. 080.380.0005

TLC-088 MARINARO BRAND 3/4" MANUAL BENCH COLUMN DRILL

Marinaro (Brazil) Model B2 manual bench column drill, MT2 taper, 3/4" capacity, 10" x 10" table, 8" throat, 5 Vel (350 - 2220 RPM), belt speed, 3/4 HP motor

TLR-124 RADIAL DRILL 13" COLUMN X 60" FLAG CARLTON BRAND

• Manufacturer: Carlton

Carlton (E.U.A.) Radial drill model 13 "column x 60" flag, MT5 cone, 10 HP engine

TLR-135 RADIAL DRILL, 10" COLUMN X 44" FLAG LUX BRAND

• Manufacturer: Luigi Bandera

LUX (Tw) Radial Drill Model 1042, 10" column x 44" flag, 12 speed (44-1500 RPM), MT3 taper, 3 HP motor, s/n. 9715

TLR-119 RADIAL DRILL, 10" COLUMN X 38" FLAG DONAU BRAND

• Manufacturer: Donau

Donau (Germany) Drill radial model DR32, 10 "column x 38" banner, table 19.5 "x 42", 12 vel. (60-1800 RPM), MT3 cone, 2.2 Kw motor, s / n. 1002-1