Used Machine Tools in Chihuahua, Mexico

TA-GS-60RO2 - 2-SIDE GUMMING MACHINE - 60" WIDE CAPACITY

• Manufacturer: amxmachinery.com

2 SIDE GLUING MACHINE - 60" WIDE CAPACITY New with warranty Roller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained. Set of three rolls (one doctor roller) for ...

QM-R-RCGS - 1 AND 2 SIDE GUMMING MACHINES - 24", 48" AND 63" WIDE

• Manufacturer: amxmachinery.com

R-RCGS-1-24-1.75 - GUMMING MACHINE - 1 SIDE - WIDTH 24" - 1.75" OPENING R-RCGS-1-24-1.75 - GUMMING MACHINE - 2 SIDES - 24" WIDE - 1.75" OPENING - 1.75" - 1.75" OPENING 1.75" OPENING R-RCGS-1-48-1.75 - GUMMING MAC...

3 HP ROUTER WITH 72 CM THROAT AND MEDIUM DRILL BIT

• Manufacturer: amxmachinery.com

PART: 12405-11 - 3 HP ROUTER 72 CMS THROAT AND MEDIUM DRILL BIT USED - GOOD CONDITION 220V, 3 PHASE

MOLDING MACHINE HEADS - 3" LONG - 1-13/16" SHAFT - 2-1/8" SHAFT

PART: 12305 - MOULDER HEADS - 3" LONG - 1-13/16" SHANK - 2-1/8" SHANK WITHOUT 2-1/8" SHAFT BUSHING USED - VERY GOOD CONDITION North American Gladu hydro-lock 6 wings 20 degrees Inside Diameter - Shaft: 1-13/16" (...

MOLDING MACHINE HEADS - 5" LONG - 1-13/16" SHAFT - 2-1/8" SHAFT

PART: 12305 - MOULDER HEADS - 5" LONG - 1-13/16" SHANK - 2-1/8" SHANK WITHOUT 2-1/8" SHAFT BUSHING USED - VERY GOOD CONDITION North American Gladu hydro-lock 6 wings 20 degrees Inside Diameter - Shaft: 1-13/16" (...

MOLDING MACHINE HEADS - 40 MM SHAFT X 122 MM DIAMETER X 100 MM LENGTH

PART: 12109 - MOULDER HEADS - 40 MM SHAFT X 122 MM DIAMETER X 100 MM LONG USED - IN GOOD CONDITION 20° CUTTING ANGLE SEVERAL IN STOCK

MOLDING MACHINE HEADS - 40 MM SHAFT X 122 MM DIAMETER X 150 MM LENGTH

• Manufacturer: amxmachinery.com

PART: 12110 - MOULDER HEADS - 40 MM SHAFT X 122 MM DIAMETER X 150 MM LONG USED - IN GOOD CONDITION 20° CUTTING ANGLE SEVERAL IN STOCK

2023 AGT 2000

• Manufacturer: AGT

Drill Bit For Mini Hydraulic Loader Drill Bit Measurements 8x48 inches 15x48 inches 16x48 inches

RAINMAN PATCHER

7 - PATCHING MACHINE. MACHINE RAINMAN PATCHING MACHINE WITH PROCESS DIMENSIONS FROM 0.6 MM TO 2.5 MM THICKNESS, EQUIPPED WITH 5 HP MOTOR AND ADJUSTABLE TABLE TO DIFFERENT SIZES OF DIAMETER OF THE SHEET TO BE DIAM...

- BATON - HAWKER 2000

• Manufacturer: Hawker

- BATON - HAWKER 2000 USED - GOOD CONDITION Feed rollers Knives Sleeves Sharpening machine

TARACAS RESACADORA 1 RESAQUE

PART # NC1-1400-2 - PALLET WRAPPER - 1 WRAP New with warranty Motor 10 HP, 220V, 3 phases Capacity: 30" minimum, no maximum sticks Rewind size: Standard size 0 to 3" wide x 9" long Head with fixed and helical bla...

7.5 HP SPINNING TOP - INDUSTRIAL - HEAVY DUTY

• Manufacturer: amxmachinery.com

PART # 2EX-ET-150 - SPINNER - 7.5 HP MOTOR - WITH 1-1/4" SHAFT PART # 2EX-ET-160 - SPINNING TOP - 10 HP MOTOR - WITH 1-1/4" SHAFT New with warranty Engineered for continuous industrial use, shapers are great mach...

CORNER CUTTER

• Manufacturer: amxmachinery.com

PART: 2AC-CM40SPCL - CORNER CUTTER - FOR METAL AND PLASTIC. The Corner Cutter cuts corners, holes and slots on nameplates, badges, signs and other items. There are over 30 interchangeable cutting units from 1/8" ...

PEDESTAL ROUTER - 10 HP - 29-1/2" THROAT

• Manufacturer: amxmachinery.com

PART: 2NC-NT750-10 - PEDESTAL ROUTER - 10 HP - THROAT 29-1/2" New with warranty 10 HP spindle drive motor 2 Speed Spindle: 8,100 / 16,300 RPM Depth stops: 6 position turret stops, adjustable Table surface area: 9...

REFILER

PART # 12C-R1 - REGRINDER PORTER OR MAKITA MOTOR CABLE WITH ATTACHMENT (DRILL BIT, HOLDER, BRAKE AND CORNER BIT)