Used Disco Machine Tools in Germany

Driving flange of – bayonet disc fastening taper size 8 19779

Flange mounting, driving flange Chuck flange with: Driving pin | Outside: Ø 300 mm | Short taper for: Bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm | Mass: 30 | Internal storage: 3A20803

Driving flange of – bayonet disc fastening taper size 6 19780

Flange mounting, driving flange Chuck flange with: Driving pin | Outside: Ø 300 mm | Short taper for: Bayonet washer mounting, taper size 6, | Hole circle: Ø 133.4 mm | Number: 1x discs available | Mass: 20 | Int...

Driving flange of – bayonet disc fastening taper size 6 19783

Flange mounting, driving flange Chuck flange with: Driving pin | Outside: Ø 315 mm | Short taper for: Bayonet washer mounting | Cone size: 6 | Hole circle: Ø 133.4 mm | Mass: 20 | Internal storage: 3A20902

Driving flange of – bayonet disc fastening taper size 8 19786

Flange mounting, driving flange Chuck flange with: Driving pin | Outside: Ø 250 mm | Short taper for: Bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm | Mass: 13 | Internal storage: 3A21101

GN disc milling cutter Ø 33.3x4.5x16, Z=16 solid carbide, FK64-F3, set of various sizes

• Manufacturer: HARTWERKZEUG

Set consists of: 4x = 33.3x4.5x16 Z=16 2x = 32.38x5.0x16 Z=16 Including packaging Retail price 1.0

50x3M 27709 984F TR Durable Edge Ceramic Grinding Wheel

• Manufacturer: Disco

The 3M 27709 (984F TR) is a durable 50.8 mm (2-inch) edge disc for heavy-duty grinding and finishing applications. Designed for efficiency and longevity, this disc withstands demanding industrial use while delive...

Disc grinder from – 420 mm 15068

disc sanding machine, disc sanding machine, disc sander, disc sanding machine, edge sanding machine, edge sanding machine

Modul hob cutter 2 pieces from locating washer - 650.054.06A SPAN. 5° EV4CO 7659

• Manufacturer: Fixierscheibe

Gear hobber, module hobber, hobbing cutter, gear hobber, module hobbing head, roll end mill, roll hobber, hob cutter, spline hob, spline shaft hobber

HBM 150 DISC/BAND Combination Grinding Machine

• Manufacturer: Disco

Belt width 150 mm Strap length 1220 mm Grinding wheel dimension 225 mm Work table: 150 x 400 mm Table adjustable up to 90 degrees Table surface 150 x 130 mm Connection voltage 230 V Total power requirement 0.75 k...

Disc milling cutter from Wodex – SK50 Ø 200 x 12 mm 26657

• Manufacturer: Wodex

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, side milling cutter

Coarse cleaning disc 6 pieces from 3M Scotch-Brite – CG-DC 61122 Ø 150 mm 35765

• Manufacturer: 3M Scotch-Brite

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc

Coarse cleaning disc 2 pieces from 3M Scotch-Brite – CG-DC 61163 Ø 200 mm 35766

• Manufacturer: 3M Scotch-Brite

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc

Num Proc PC FC 200 203 500 + IBM hard disk | DDLA-21620 104395

• Manufacturer: Num Proc PC

Grinding disc 3 pieces from Tyrolit – 2653 C 80 J 5 V15 Ø 150x20x20 mm 29472

• Manufacturer: Tyrolit

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive tools, abrasive trestle wheel

Grinding wheel 55 x 70 x M16 mm #B10769

• Manufacturer: Tyrolit

Tyrolit Type 65768 55 x 70 x M16 mm grinding wheel, grinding drum, grinding head - unused stock - Dimension: Ø W 13 E 11 Tested according to EN 12413 Price per carton ( 36 pieces ) The article is unused and packe...