Used processing in Switzerland

LASA LR6-200DL Ref No: 48420

• Manufacturer: Lasa

Object: 48420 | Feed velocity max.: 18 m/min | Sheet width max.: 153 mm | Coil weight max.: 0.5 to | Max. diameter of coil: 1000 mm | Sheet thickness max.: 1.5 mm | Number of leveller rolls: 7 | Total power...

2005 ARKU RM 50X/9 ECOPLAN Ref No: 43890

• Manufacturer: Arku

Coil line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU RM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-to-length s...

1989 ARKU RM 5035.4/21 Ref No: 42744

• Manufacturer: Arku

Line consisting of + Uncoiler ARKU AH4000/MSG-4Q + insert attachment ARKU + precision leveller ARKU RM 5035 4/21 + band loop ARKU levelling capacity according to diagram

2015 HS AUTOMATION MS41OL Ref No: 45513

• Manufacturer: HS AUTOMATION

- Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...

2000 AMT AHDR 500 Ref No: 43446

• Manufacturer: AMT

- Double reel - Load capacity 500 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

• Manufacturer: Arku

Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

2021 SACFORM RMS11-604 Ref No: 42826

• Manufacturer: SACFORM

Object: 42826 | Controls: SCHNEIDER | Sheet width max.: 600 mm | Sheet thickness max.: 4 mm | Feed velocity max.: 32 m/min | Feedstock transport direction: left to right | Sheet width (min): 60 mm | Sheet th...

1999 KOHLER 50.140/21-3000.1VSRM + HK Ref No: 46805

• Manufacturer: Kohler

KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

1983 SMT MV20 BL5022 Ref No: 42997

• Manufacturer: SMT

Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

2010 PLASMATOME 20 MPC Ref No: 51131

• Manufacturer: PLASMATOME

The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

1995 KAISER V63/620 Ref No: 54501

• Manufacturer: Kaiser

Operating hours: 74601 (measured on 14-05-25, machine is still in use) Maintenance records available upon request

2003 NEFF DP 800 Ref No: 46230

• Manufacturer: Neff

Complete hot forming line consisting of: * Hydraulic press NEFF 800 to. * Ruhstrat furnace system: - Natural gas heating - Temperature 930°C - max. lining width: 1850 mm - Furnace length: 10800 mm * Strothmann Fe...

SCHULER S2-160-1.25-30-160 Ref No: 49505

• Manufacturer: Schuler

Object: 49505 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 160 to | Table surface (left-right): 1130 mm | Table surface (front-back): 1000...

SCHULER PH 200/1 Ref No: 48524

• Manufacturer: Schuler

Object: 48524 | Drive system: hydraulic | Openings in uprights: no | Number of slide actions: 1 | Table cushion: yes | Total force (nominal): 200 to | Table surface (left-right): 1000 mm | Distance table - sli...