Used kp a

KNUTH MODEL KP GANTRY-TYPE HYDRAULIC PRESS

• Manufacturer: Knuth Werkzeugmaschinen
• Model: KP
• Stroke length: 500.37999999999994 millimeter

KP 70 KP 100 KP 150 KP 200 Working Area Pressure force 77 t 110 t 165 t 220 t Stroke 19.7 in Stroke speed 0.08 in/s Rapid Feed Rapid feed 43 in/min 52 in/min 47 in/min 47 in/min Drive Capacity Motor rating hydrau...

Electric hydraulic 2-column workshop press wheel bearing press 3 tonnes .de

🔧 Electric-hydraulic 2-column workshop press 3 kW hydraulic drive · approx. 3 tons pressing force 📊 TECHNICAL DATA Version: 2-column workshop press Drive: Electric-hydraulic, 3 kW Max. oil pressure: 150 bar Max. ...

2007 SICMI KP 100

• Manufacturer: SICMI
• Power requirement: 2.2 kilowatt

Hydraulic workshop press The machine is of the Italian make SICMI, which was traded by the Knuth company.

LASCO KP 100 SO

• Manufacturer: Lasco
• Stroke length: 300 millimeter
• Daylight: 900 millimeter

Stroke: 300 mm | Daylight: 900 mm | Driving power: 30 kW | Lower ejector: 100 mm | Upper ejector: 100 mm | Press capacity: 100 t | Working pressure: 6 bar | Ram (front to back): 700 mm | Ram (left to right): 900...

2007 LASCO KPS 630

• Manufacturer: Lasco

Comment: Year of construction 2007 Press capacity: 630 t | Max. distance between table and ram: 1150 mm | Table size (left to right): 850 mm | Table size (front to back): 900 mm | Ram (left to right): 850 mm | Ra...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Stroke length: 500 millimeter

The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notch...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Stroke length: 500 millimeter

The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notch...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Stroke length: 500 millimeter

The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notch...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Stroke length: 500 millimeter

The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notch...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Stroke length: 500 millimeter

The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notch...

WMW PYE63S1 hydraulic boom press

• Manufacturer: WMW
• Model: PYE 63 S

WMW PYE63S1 hydraulic boom press after a major overhaul. Technical parameters of the machine:

Friz PD 6

• Manufacturer: Friz
• Model: PD 6

Thru Feed Press Line make Friz type PD 6 short cycle thru feed press line, consisting of: - Glue Spreader make Friz type LW 2-14 working width 1200 mm application roller diameter 210 mm doctor roller diameter 1...

1972 ČKD Hronov TEVUN 6 (QPDA 60/60/1)

• Manufacturer: ČKD Hronov

Nominal power 6000 kp Work at unit sound for 1 stroke 5 km/min Sheet thickness (for single stroke) 1.6 mm - pt=40 kp/mm2 Work in continuous operation for 1 stroke 2.5 kpm Sheet thickness (for continuous operation...

Vincent KP-10 Screw Press – 10" SS Screw, 7.5 HP, 10–100 GPM, Heavy-Duty Dewatering

• Manufacturer: VincentVincent

53978001 Vincent Screw Press, Model KP-10, heavy-duty, continuous dewatering system, 10-inch diameter stainless steel screw, approximately 7.5 HP motor operating at approximately 1,740 RPM. With approximately 12"...