Used Hydraulic Presses in Saxony, Germany

2003 hydraulic Workshop Press Zeppelin

• Manufacturer: Zeppelin

HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 1...

WINTER COLD PRESS SOLID 4013-110 DELUXE

Technical data: - pressing area 4000 x 1350 mm - Sturdy hard aluminum heating plates - Total pressing pressure 130 t - with full press surface = 2.5 kg/cm2 - with half press surface = 5.0 kg/cm2 - max. opening wi...

Single Column Press - Hydraulic EIGENBAU

• Manufacturer: Eigenbau

Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation

WINTER TOP RAM PRESS SOLID 1340 UPC PRO

Technical data: - Table size 1300 x 4000 mm - Total pressing pressure 110 to - 8 hydraulic cylinders Ø 80 mm - Piston stroke 600 mm - Max. opening width 1300 mm - Hydraulic pump 1.5 kW - Pressure gauge with set a...

2022 Rodcraft WP30P

• Manufacturer: Rodcraft

Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./...

1991 WMW Zeulenroda PYE 160 S1

• Manufacturer: Zeulenroda
• Model: PYE 160

manual counter Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 2 | Pressure: 160 t | Stroke: 500 mm | Throat: 360 mm | Max. ram stroke: 500 mm | Distance tab...

1976 WMW ZEULENRODA PYE 40 S1

• Manufacturer: Zeulenroda
• Model: PYE 40
• Stroke length: 500 millimeter

Operation via two-hand control panel. (and one-hand operation)

WMW Zeulenroda PYE 25 SS

• Manufacturer: Zeulenroda
• Model: PYE 25
• Stroke length: 500 millimeter

Operation via two-hand control panel (and one-hand operation in set-up mode) Continuous and single stroke TÜV until 05/2024

WINTER cold press SOLID 3013-100

- pressing area 3000 x 1300 mm - stable steel plates 42 mm - total pressing pressure 100 t (3,1 kg/cm2) - max. opening width 500 mm - 6 hydraulic cylinders Ø 100 mm - hydraulic pump 5,5 kW - total power 5,5 kW - ...

WINTER continuous press SOLID 3016 A 200

- pressing area 3000 x 1600 mm - stable steel heating plates 42 mm with thermal oil heating - total pressing pressure 200 t (4,2 kg/cm2) - 8 hydraulic cylinders 120 mm - 2 short hydraulic cylinders Ø 80 mm - clos...

WINTER continuous press SOLID 2513-120T

- pressing area 2500 x 1300 mm - sturdy steel heating plates 42 mm with thermo-oil heater - total pressing pressure 120 t (3,7 kg/cm2) - 8 hydraulic cylinders 100 mm - opening width 250 mm - closing speed 20 - 60...

WINTER BLOCK GLUE PRESS type 3000/300

Technical data: - Working dimensions: length 3000 mm, height 1000 mm - gluing thickness 150 - 300 mm - number of pressure cylinders 6 - cylinder type Ø 100 x 120 mm - continuous pressure plate 3000 mm - Max. forc...

WINTER SOLID 1330 UPC PRO top piston press

Technical data: - Table size 1300 x 3000 mm - total pressure 80 to - 6 hydraulic cylinders Ø 80 mm - piston stroke 600 mm - max. opening width 1300 mm - hydraulic pump 1,5 kW - pressure manometer with set and act...

WINTER SOLID 1325 UPC PRO top piston press

Technical data: - Table size 1300 x 2500 mm - total pressure 80 to - 6 hydraulic cylinders Ø 80 mm - piston stroke 600 mm - max. opening width 1300 mm - hydraulic pump 1,5 kW - pressure manometer with set and act...