Used Davis-Standard Processing

6″ Davis Standard 36:1 -400 HP

• Manufacturer: Davis-Standard

6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)

1 1/4″ Davis Standard Extruders (Stripers) 4 Available

• Manufacturer: Davis-Standard

4.5″ Davis Standard Extruder MV45IN45 1997

• Manufacturer: Davis-Standard

4.5″ Davis Std. Extruder MV45IN45 – New 1998 Water Cooled 24:1 N-Vented

Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D

• Manufacturer: Davis-Standard
• Model: 60IN60TPIH

51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...

2.5" Davis Standard / Gala Pilot Plant Pelletizing Line – 75 kW Extruder, Underwater Pelletizer, Spin Dryer, 2020

• Manufacturer: Davis-Standard
• Model: 25

53759005 Used 2.5" Davis Standard/Gala Pilot Plant Pelletizing Line. 2.5" Davis Standard Extruder, Model 25, 24:1 L/D Ratio, 4 zones air cooled barrel, 75 KW HP Capacity, 1.25 SF, 17.26 to 1 gear reduction ratio,...

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder

• Manufacturer: Davis-Standard
• Model: Thermatic

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...

Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001

• Manufacturer: Davis-Standard

10755163 Used Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox...

6″ Davis Standard 60IN60TPIH 30:1 500 HP VENTED EXTRUDER

• Manufacturer: Davis-Standard

Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox

• Manufacturer: Davis-Standard
• Model: 150IN DS-20

10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...

75mm Davis Standard “Super Blue” Extruder 24:1 – Air Cooled 2013

• Manufacturer: Davis-Standard

3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998

• Manufacturer: Davis-Standard

3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25

3.4″ Davis Std. Extruder (Recently Rebuilt)

• Manufacturer: Davis-Standard

3.4″ Davis Std. Extruder (Recently Rebuilt) 50 HP AC Motor with AC Drive – rated up to 100 HP 24:1 L/D Ratio – Non-Vented Eurotherm Controllers Screw in Good Condition NOTE: Rebuilt and painted 2 years ago, never...

Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled

• Manufacturer: Davis-Standard

10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...

3.5″ Davis Std. Rubber Extruder – New 2006

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006 Model 35IN35DSRE 20:1 L/D Ratio Gearbox Ratio: 17.39.1 257 HP DIMENSIONS: 66″W x 120′ L x 78″ High Dyn. Thrust Cap. 408,300 lb. Dyn Thrust Cap. 185,204 KG Liters: 6 WE...