DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437
- Manufacturer: Davis-Standard
Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...
Elk Grove Village, IL2.5" Davis Standard / Gala Pilot Plant Pelletizing Line – 75 kW Extruder, Underwater Pelletizer, Spin Dryer, 2020
- Manufacturer: Davis-Standard
- Model: 25
53759005 Used 2.5" Davis Standard/Gala Pilot Plant Pelletizing Line. 2.5" Davis Standard Extruder, Model 25, 24:1 L/D Ratio, 4 zones air cooled barrel, 75 KW HP Capacity, 1.25 SF, 17.26 to 1 gear reduction ratio,...
Belvidere, IL
DAVIS STANDARD 24″ X 48″ 17581
- Manufacturer: Davis-Standard
One (1) used 48″ Davis Standard cooling and polishing stand having three (3) nominal 24″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation. Rolls are pneumatically actuated. ...
Elk Grove Village, IL
DAVIS STANDARD 4.5″ 30:1 L/D 18937
- Manufacturer: Davis-Standard
One (1) used Davis Standard model 45IN45 extruder. S/N M3316. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...
Elk Grove Village, IL
DAVIS STANDARD 4.5″ 30:1 L/D 18936
- Manufacturer: Davis-Standard
One (1) used Davis Standard model 45IN45 extruder. S/N M3315. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...
Elk Grove Village, IL
DAVIS STANDARD 130mm 32:1 L/D 18933
- Manufacturer: Davis-Standard
One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...
Elk Grove Village, IL
DAVIS STANDARD 130mm 32:1 L/D 18935
- Manufacturer: Davis-Standard
One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...
Elk Grove Village, IL
DAVIS STANDARD 15INDS20 1.5″ EXTRUDER 12754
- Manufacturer: Davis-Standard
Davis standard model 15INDS20 1.5″ extruder S/N K-9754. SO# 02359. 24:1 L/D. Powered by a fan cooled 15 HP 500-Volt 1750/2300 RPM DC motor through a 6.53:1 gearbox 152 RPM screw speed. Electrically heated and fan...
Elk Grove Village, IL
DAVIS STANDARD 1.5″ 20:1 L/D 17504
- Manufacturer: Davis-Standard
One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...
Elk Grove Village, IL
DAVIS STANDARD 4.5″ 30:1 L/D 18589
- Manufacturer: Davis-Standard
One (1) used Davis Standard model 45IN45CT extruder. S/N P5568. Shop order 53447. Extruder has 30:1 L/D ratio with a six (6) zone electrically, heated air cooled, and non-vented barrel at a 42″ centerline. Water ...
Elk Grove Village, IL
Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D
- Manufacturer: Davis-Standard
- Model: 60IN60TPIH
51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...
Belvidere, IL
DAVIS STANDARD 52″ WIDE 3 14917
- Manufacturer: Davis-Standard
Davis standard model Exemplar cooling and polishing stand with three 52″ face chrome plated rolls mounted in a vertical arrangement for down stack operation. The top roll measures a nominal 18″ in diameter, while...
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword
