Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL- Trusted Seller
Davis-standard Extruder
- Manufacturer: Davis-Standard
- Model: DS-125
99 Rpm / 1750 Name: Extruder | Arrival date: 10-03-2025 | Dimensions l x w x h (inches): 57 x 63 x 87 | Capacity: 11900LBS | Electrical: 1/50/60/240/115 | Weight (lb.): 1410 | Available quantity: 1
$4,999 USDEuclid, OH - Trusted Seller
DAVIS STANDARD 150INDS-20
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...
Hainesport, NJ - Trusted Seller
DAVIS STANDARD EXTRUDER MDL. MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....
Illinois, USA - Trusted Seller
1990 Davis Standard 60IN 60 TPIH
- Manufacturer: Davis-Standard
30:1 L/D Two-Stage Feed Screw: Replaced in 2012 ($21,000.00) 40’ Long Water Trough Multispeed Belt Puller 6”X36” (2 New Belts $721.00 ea.) Hd Pneumatic Cutter (Guillotine Type) 25hp Double Feed Shredder-Granulato...
$74,900 USDChicago, IL - Trusted Seller
2014 Davis-Standard Super Blue 75MM
- Manufacturer: Davis-Standard
Used 3″ Davis-Standard Super Blue 75MM Extruder with BPM Bay Plastics Machinery WBX1210-15 Water Bath, EVAK-06 Vacuum Air Knives, and SB 100 Pelletizer, 2014: DS Super Blue Single Screw Extruder: – 3″ (75MM) – L/...
$69,900 USDChicago, IL 
1987 Davis Standard MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
Extruder Used Davis Standard MV35IN35SR (1987) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you ha...
USA- Trusted Seller
3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line
- Manufacturer: Davis-Standard
3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line 10" 3 roll sheet stack line, consisting of: 1.25" Davis Standard extruder, model DSPW-125V-H24, 24:1 L/D, electrically heated, water cooled with circulation p...
Cleveland, OH - Trusted Seller
2.5" Davis Standard Extruder, 24:1, 50 HP
- Manufacturer: Davis-Standard
2.5" Davis Standard Extruder, 24:1, 50 HP Used 2.5" Davis Standard extruder, model 25IN25H, 24:1 L/D, electrically heated, air cooled, jacketed feed section, top vented and plugged barrel, 17.2:1 gearbox ratio, 1...
Cleveland, OH - Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH - Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH - Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH - Trusted Seller
6" Davis Standard Egan / Berringer Water Ring Pelletizing Line
- Manufacturer: Davis-Standard
6" Davis Standard Egan / Berringer Water Ring Pelletizing Line Used 6" Davis standard Egan / Berringer water ring pelletizing line consisting of: 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, elect...
Cleveland, OH - Trusted Seller
2001 DAVIS STANDARD PEDESTAL
- Manufacturer: Davis-Standard
- Model: PEDESTAL
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel. New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt. Previously used as...
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
Tip: Enter manufacturer, model or keyword
