Used Material Handling

Performance Health 597107 Ankle Brace X-Large White Clamshell

• Manufacturer: Hygenic/Performance Health

The Performance Health 597107 Ankle Brace is designed to provide superior support and stability for individuals suffering from ankle injuries or instability, making it an ideal solution for both clinical and home...

Used dry material feeder system

• Manufacturer: Acrison

Used dry material feeder system consisting of a super-sak unloading platform mounted above a small stainless steel vibrating hopper equipped with stainless steel knife valve that discharges to small diameter incl...

1989 Novatec NPH-HOPPER Used

• Manufacturer: Novatec
• Model: NPH-

600 lb Capacity Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located...

Stainless Steel 55 Gallon Drums

55 gallon drums - stainless steel 304. Approx 11 drums with reinforcing bands, and 10 drums without reinforcing band. Drums have lids. Specify which kind - priced by the drum (minimum order 3 drums). Quantity (2...

CONAIR FRANKLIN DB12SE03MB DustBeater Vacuum Loader USED

• Manufacturer: Conair

4" Cylinder Height 7.25" Cone Height 12" Inside Cylinder 13.75" Filter Diameter 14.5" Inside Lid Cylinder 4.75" Bottom Inlet / Outlet Approx. 40.79 mm Tested Good Buyers are welcome to inspect equipment p...

UNA-DYN LS-45 Auto Loader USED

• Manufacturer: Una-Dyn

Self Contained with Lid and Filter Outside Diameter: 10" Inside Diameter: 9" Outlet 1 Inside Diameter: 1.25" Bottom Outlet Inside Diameter: 3" Flange: 7" x 5.5" Holes Center-to-Center: 6.5" x 5" 110 Volt ...

UNA-DYN 82894.06 Loader Used

• Manufacturer: Una-Dyn

82894.06 LID AND FILTER INCLUDED OD: 10" ID: 8 3/4" Outlet 1: 1 1/2" Bottom outlet: 2 1/2" Flange: 7" x 5 1/2" Bolt Holes, Center-to-Center: 6 1/4" x 4 3/4" Buyers are welcome to inspect equipment prior t...

AMI Spring Loaded Industrial Pallet Load Leveler 3500lbs 42x46" Swivel Top

• Manufacturer: AMI

Used, in Good Working Condition. Removed From a Working Environment. Not sure what weight the springs are set at. Swivel top 42x46". 30" high with no load. If this item ships as Flat Rate Freight please see detai...

METAL FABRICATOR STAINLESS STEEL HOPPER USED

• Manufacturer: METAL FABRICATOR

2 1/4" Inlet / Outlet 27 1/2" Height 28" Diameter Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, ...

BUNTING 33373 Drawer Magnet USED

• Manufacturer: Bunting

1 7/8" Diameter Inlet / Outlet Hole Top of Flange 6.25" x 6.25" Top Flange 1.25" Cone 1.25" Cylinder 3.75" x 6" Bottom Flange 1 7/8" Diameter Bottom Inlet / Outlet 2.25" from Top of Cone to Cylinder 5" x 5...

INFRAPAK C42D17NC20A

• Manufacturer: INFRAPAK

The INFRAPAK C42D17NC20A is a used rotary pallet stretch wrapper designed to efficiently secure palletized loads with stretch film. This reliable machine enhances load stability and protection during transport an...

METAL FABRICATOR Drawer Magnet USED

• Manufacturer: METAL FABRICATOR

3.25" x 5" Center to Center Holes Bottom Flange Approx. 9" x 9" Top Flange 9" x 9" Bottom Flange 1.25" Cylinder Height 1.5" Cone Height 76.67 mm Diameter Inlet / Outlet Bottom Flange Approx. 89.93 mm Diamet...

BUNTING MAGNETICS Drawer Magnet 53169 USED

• Manufacturer: Bunting

4.25" Diameter Inlet / Outlet Top Flange Approx. 7.5" x 7.5" Top Flange 1.5" Cone Height 1.25" Cylinder Height 7.5" x 7.5" Bottom Flange 6" x 6" Center to Center Bottom Flange 3.75" Diameter Inlet / Outlet ...

METAL FABRICATOR Drawer Magnet USED

• Manufacturer: METAL FABRICATOR

50.67 mm X 50.67 mm Inlet / Outlet Square Top Flange 4.5" x 4.5" Top Flange 3" Bottom Cone 4.5" x 4.5" Bottom Flange 50.67 mm x 50.67 mm Inlet / Outlet Square Bottom Flange Expedited shipping services are av...

METAL FABRICATOR Drawer Magnet USED

• Manufacturer: METAL FABRICATOR

75.61 mm Diameter Inlet / Outlet Top Flange Approx. 7" x 7" Top Flange 6" x 6" Center to Center Holes Top Flange Approx. 7" x 7" Bottom Flange 6" x 6" Center to Center Holes Bottom Flange Approx. 75.75 mm Di...