Used variable speed in falanxidao

1980 Warner & Swasey SC-20-120 Slant Bed 2843563
- Manufacturer: Warner & Swasey
Two spindle speed ranges Power: Existing | Control: Siemens 840 CNC or Fanuc 18iTB | Turret 1: 8-Station | Chuck type: 4-Jaw Independent | Spindle bore: 8.38 in 212.85 mm | Spindle nose: A2-15 | Spindle power: 75...
Washington, PA
1999 Okuma 2SP25HG 25121
- Manufacturer: Okuma
Power: Existing | Swing: 15.75 in 400.05 mm | Control: OSP-LGU | Chuck type: Howa Univeral Hydraulic | Motor power: 40.00 HP 30.00 kW | Spindle speed: 45 - 4,500 RPM Infinitely Variable | Chuck diameter: 10.00 i...
Washington, PA
Levin Precision Jewelers Watchmaker Clockmakers Lathe Variable Speed Tooling
- Manufacturer: Levin
Levin Precision Jewelers Watchmaker Clockmakers Lathe Variable Speed Tooling Equipped With Variable Speed, Cross Slide, 6-Station Turret Assembly, Tailstock, Table Very Clean Machine, Hard to Get! Machine Can be ...
1980 Lodge & Shipley ProfiTurn 40 3220-25
- Manufacturer: Lodge & Shipley
38.5 inch (978 mm) swing over carriage, ways reground 2007, new servo motors, drives, and CNC 1990s
Washington, PA
1971 HARDINGE MODEL HLV-H PRECISION TOOL ROOM LATHE
- Manufacturer: Hardinge
- Model: HLV-H
HARDINGE MODEL HLV-H PRECISION TOOL ROOM LATHE New 1971 Swing Over Cross Slide 6" EQUIPPED WITH: FIMS Quick Change Tool Post Assorted FIMS Quick Change Holders Taper Attachment Follower Rest Standard Hardinge Gea...
Bannockburn, IL
Atlas – Dake MDII 995010 195461
- Manufacturer: Dake
Automatic loading Feed range: 0 – 0.125 / Rev (Infinitely variable) | Rail gauge: 56.50 in 1435.00 mm | Speed range: 16 – 32 RPM (Infinitely variable) | Maximum axle length admitted: 108.00 in 2743.00 mm | Head t...
Washington, PA
2006 SMS Accu-Cell AC-300-2 79489
- Manufacturer: SMS Eumuco
2 arm overhead gantry robot transfer systems; linear scales for x and z axis; air gauge flex gauge in-line computerized gauging station; Mayfran coolant pumpback system with 16" 2.2 kw single horizontal chip shre...
Washington, PA
2005 SMS Accu-Cell AC-300-2 79453
- Manufacturer: SMS Eumuco
In-line computerized gauging station, Mayfran coolant pumpback system with 16" 2.2 kw single horizontal chip shredder, GE Fanuc series 90-30 PLC control, air conditioner for electrical cabinet, additional 2 arm o...
Washington, PA
SMS V1000 CNC 4-Axis Vertical Turning Center 79040-0886
- Manufacturer: SMS Eumuco
Turning diameter can be increased to 60 in (1525 mm), spindle diameter 11.25 in (286 mm), spindle nose 15"-a2
Pennsylvania, USA
2000 M&M HF450TT/2S 26-2453-00
- Manufacturer: M&M
Power: 3 PH / 60 Hz / 480 V existing, control voltage 110 volt / 24 volt DC | Weight: 48400.00 lbs 22000.00 kg | Control: Tractronic | Coolant: Yes | Motor power: 204.00 hp 152.00 kW | Ejector travel: 17.72 in 4...
Washington, PA
1983 Crawford Swift LaPointe B5023
- Manufacturer: LaPointe
2 heavy duty 23.6 (600mm) capacity steady rests, 4 section bed, total bed length 742 in( 18.94 m), moveable headstock with positive latch every 4.33 in (110mm), moveable CNC slide, slide and headstock can be posi...
Washington, PA
9" X 28" HARDINGE DV-59 LATHE WITH THEMAC ID GRINDER SPINDLE
- Manufacturer: Hardinge
- Model: DV 59
419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information 9" X 28" HARDINGE DV-59 LATHE WITH THEMAC ID GRINDER SPINDLE : STOCK #22733 Stock #: 22733 SERIAL VDC-8220-A MODEL DV-59 SWING 9" CENTERS 28" S...
Holland, OH
1989 Kramatorsk 1A66O.400 709
- Manufacturer: Kramatorsk
Dual cross slides, two closed three-point steady rests with changeable end contacts, also two adjustable half steady roller rests maximum diameter 40 inch (1016 mm)
Washington, PA
RIMEX 1410
- Manufacturer: ZMM
- Spindle bore: 205 millimeter
Height of centers: 705 mm | Swing over bed: 1410 mm | Swing over cross slide: 1000 mm | Width of bed: 800 mm | Distance between centers: 2000; 3000; 4000; 5000; 6000; 7000; 8000; 9000 mm | Spindle nose din 55026...
Milan, Italy
2002 39"/120" x 98"/157"BINNS & BERRY Universal Sliding Bed Gap Lathe
- Manufacturer: Binns & Berry
39"/120" x 98"/157"BINNS & BERRY Universal Sliding Bed Gap Lathe New 2002 Swing Over Bed Plate (in Gap) – 120” Adjustable Gap Width From Nose – 0-72” Center Distance, Gap Closed – 98.4” Center Distance, Gap Open ...
Bannockburn, IL