Used variable speed in Illinois, USA

Baker Perkins High Shear Mixer/Granulator – 10 Liter | Variable Speed to 3000 RPM | Lab or Pilot Scale

• Manufacturer: Baker Perkins

52429002 Used Baker Perkins High Shear Mixer/Granulator; 10 Liter Capacity; Variable speed from 0 to 3000 RPM. Our freight specialists can assist you with door to door transportation and all customs documents nee...

CUMBERLAND #6 PELLETIZER 18201

• Manufacturer: Cumberland

Cumberland size 6 pelletizer. S/N 26111-6446. 12 knife bolt on rotor. One bed knife. Powered by a 3 HP 208/220/440-volt motor thru a US Motors mechanical variable speed drive. Mounted on casters. Includes starter...

SCHEER BAY SGS100-E PELLETIZER 17692

• Manufacturer: Scheer

Used 4″ wide Scheer Bay pelletizer Model SGS100-E. S/N SE10CC-9801, 460 volt A/C input, 3 phase, 60 hertz, 14.2 amps. Has 32 knife carbide inlay helical style rotor driven by an AC Tech variable speed controller....

SCHEER BAY SGS-50E PELLETIZER 18133

• Manufacturer: Scheer

One (1) used Scheer Model SGS-50-E strand pelletizer. S/N SE5-0707. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with Reliance variable speed controller. Mounted...

SCHEER SGS-50EL 2″ 20 KNIFE 17922

• Manufacturer: Scheer

One (1) used 2″ Scheer Model SGS-50-EL strand pelletizer. S/N 10050017. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with variable speed controller. Mounted on c...

KILLION 2″ WIDE 20KN PELLETIZER 18691

One (1) used Killion strand pelletizer. S/N 10000F. 2″ wide entrance with 20 knife carbide tipped rotor. Pneumatically actuated top feed roll. Rotor and pull rolls driven by a 1 HP D/C motor through a gearbox wit...

CUMBERLAND #6 PELLETIZER 18625

• Manufacturer: Cumberland

One (1) Used 6″ Cumberland “Quietizer” pelletizer. S/N 326050-B-8011. 16 knife rotor with bolt on blades. Sound deadening hood. Air actuated nip rolls. 5 HP 230/460-volt mechanically variable speed A/C motor. Pol...

CUMBERLAND 284 GRANULATOR WITH FEED 12939

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 325525-83061, 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife, approximate 2.75″ diameter x 8″ wide grooved knurled & interlocked steel feed rolls. Pneumatic pinched in...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12597

• Manufacturer: Irwin

Irwin Chesaw type CH-LH 28.7-04 granulator, S/N 7915, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 5HP 208-230/460V 3,460 RPM blow...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12598

• Manufacturer: Irwin

Irwin Chesaw type CS-LH 28.7-04 granulator, no serial number, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM motor through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 4″ auger system, ...