Used variable speed in Belgium

Dosing screw Ø55mm

Dimensions screw 1: Lenght: 3650mm; Width: 230mm; Hight: 260mm Dimensions screw 2,3 &4: Lenght: 3000mm; Width: 230mm; Hight: 260mm Usabul dimensions: Lenght: 2500mm iin flex tube Ø55mm; with variable speed regula...

Silvestrini welding positioner 12,5 ton

• Manufacturer: Silvestrini welding positioner

Hydraulic lifting and tilting load capacity: 12,5 ton/500 mm out of center turntable diameter: 1700 mm max tilt angle: 135° variable rotational speed: 0 0,8 rpm min height: 1280 mm max height: 2100 mm elevation...

Furansand mixing plant FRANK

700 rpm Mixer installed in a framework with 2 mobil bunkers, each 1,5 m³ useful content To pose with the lift truck With 2 pumps, resin injection and cat, 2 speeds, mixing screw Ø 130 mm, between entry and exit 8...

2008 VIET VALERIA 4CCC INF. 1350... Top and bottom calibrating sander

• Manufacturer: Viet

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, ...

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

1994 WEINIG PROFIMAT 23 Moulder

• Manufacturer: Weinig
• Model: Profimat 23

Capacity: 260 x 130 mm. Number of shafts: 5 Shaft diameter 40 mm Below 7.5 kW, right/left 7.5 kW, above 11 kW, below 5.5 kW Cardan drive Pneumatic pressers Variable feed speed, motor 2.2 kW Feed table 2200 mm Mot...

2005 LEADERMAC LMS-423S Planer all round

• Manufacturer: Leadermac

Capacity: 230 x 125 mm. Number of axes: 4 Axis diameter 40 mm Bottom 6.3 kW, right/left 7.5 kW, top 7.5 kW Mobile axis for various widths Pneumatic pressers Variable feed speed Motorized height adjustment of the ...

2004 INGERSOLL RAND N55NIRVANA

• Manufacturer: Ingersoll Rand
• Model: Nirvana

Capacity [m³/min]: 10.7 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric variable speed drive | Stars: Very Good | Weight [kg]: 1048 | Power [kw]: 55 | Outside condition: Very good | Ce mark...

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

2002 PGF (Belgium) MAXI FEEDER + ERGOLINE

• Manufacturer: PGF (Belgium)
• Size: 450x450

envelope feeder PGF MAXI FEEDER of 2002 n°102191 with suction drum, transport cylinder with 240 mm diameter, height adjustment motor with variable speed, special feed table with air line, automatic speed adjustme...

Wilhelmsburger DWV 75

• Manufacturer: Wilhelmsburger

3 cardan driven rolls, therefore no slipping/skidding and also ideal for conical rolling - Digital readout - Electromagnetic clutch - 2 speeds (variable) 3 + 6 m/min - Engine: 220 160 kWt - Rolling capacity: w...

1994 WEINIG PROFIMAT 23 Planer all round

• Manufacturer: Weinig
• Model: Profimat 23

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Mobile axle for various widths Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 ...