Used Woodworking in Bavaria, Germany

CHIPPER for all wooden surfaces

• Manufacturer: HMC 600

NEW MACHINE Type. QAC 600 Tomahawk We are pleased to offer: Chopping machine For the production of hewn wooden surfaces / beams etc. in the horizontal plane. You can also just brush. Type QAC 600 Maximum worki...

CLT & BSP production line 12000 mm x 3100 mm x 350 mm

• Manufacturer: MINDA - REICHENBACHER - WEINIG

I am currently offering: A new and completely closed-loop production line for Production of CLT ��� CLT solid wood panels. Year of construction 2023 ��� Start of service mid-2024 Capacity approx. 25,000 m² per y...

HUNDEGGER SC 1

• Manufacturer: Hundegger

OFFER: HUNDEGGER SC 1 from late 2005 Photos of the machine assembled and disassembled… Hello, Currently, I can offer this Speedcut. One used SC 1, already disassembled by Hundegger. With only a 5-axis saw, i...

HUNDEGGER SPM 2 panel cutting machine with 5 axes - fully equipped

• Manufacturer: HUNDEGGER

HUNDEGGER Speedcut SC 3 available from Dec. 25

• Manufacturer: HUNDEGGER

I am pleased to offer: HUNDEGGER SC 3 with extensive features. Available around December 2025 SC3-200 fully automatic cutting system Angle and tilt drive Automatic infeed system Cross feed conveyor (5 strands,...

Wooden chair

Wooden bench

MACC SDT 315

• Manufacturer: Macc

Control: conventional - | Storage location: Günzburg | Sawblade tiltable: ° | Cutting width: mm | Motor output: kW | Cutting height: mm | Saw blade diameter: mm | Table dimensions: mm | Saw blade: mm | Dimension...

1990 Altendorf F45

• Manufacturer: Altendorf
• Model: F45

GS tested Sled length: 2800 mm | Cutting width at the rip fence: 1000 mm | Cutting width at the crosscut fence: 2800 mm | Scoring: No | Height adjustment saw blade: manual / hydraulic | Swivel adjustment saw blad...

1996 Graule ZS 200 N

• Manufacturer: Graule
• Model: ZS200N

The circular cross-cut and miter saw type ZS 200 N or type ZS 200 is a compact and compact and clearly arranged saw for processing large-format cross-sections This machine is characterized by following features: ...

1996 Altendorf C45 compact

• Manufacturer: Altendorf
• Model: C 45

CE marking, GS test mark Sled length: 1500 mm | Cutting width at the rip fence: 700 mm | Cutting width at the crosscut fence: 2200 mm | Cutting depth: 100 mm | Scoring: No | Height adjustment saw blade: manual / ...

1999 Graule ZS135N

• Manufacturer: Graule
• Model: ZS135N

Cutting height at 90°: 135 mm | Section length: mm | Saw blade pivoting and tilting: Yes | Vertical miter range: -60° to +60° | Roller conveyor / support table: No | Number of revolutions: 2800U/min | Engine pow...

2024 Graule ZS 200 N

• Manufacturer: Graule
• Model: ZS200N

The circular cross-cut and miter saw type ZS 200 N or type ZS 200 is a compact and compact and clearly arranged saw for processing large-format cross-sections This machine is characterized by following features: ...

2000 Bösch A97

• Manufacturer: Bösch

State: very good

hydr. veneer press Langzauner LZT50

• Manufacturer: Langzauner
• Model: LZT

SN: 9/1194, unheated