Used Shrink Wrapping Machines

Edl Shrink Bundler FBS24

• Manufacturer: Frain Industries

EDL Model FBS22, inline, continuous motion, bundler and integrated shrink tunnel. Rated up to 35 bundles per minute – depending on materials and application. Product size range: 10" to 24" in Length x 5" to 14" i...

Arpac Shrink Bundler 737C

• Manufacturer: Arpac

Arpac, semi automatic, inline, shrink bundler and tunnel. Rated from 1 to 15 bundles per minute – depending on materials, application and operator dexterity. Product size range: 6" to 18" in Length x 6" to 35" in...

Arpac Shrink Bundler 737C

• Manufacturer: Arpac

Arpac, semi automatic, inline, shrink bundler and tunnel. Rated from 1 to 15 bundles per minute – depending on materials, application and operator dexterity. Product size range: 6" to 18" in Length x 6" to 35" in...

Tampco Shrink Bundler FA36

• Manufacturer: Tampco

Tampco, Model FA36, automatic inline, stainless steel shrink bundler and tunnel system. Rated from 1 to 25 bundles per minute – depending materials, application and operator dexterity. Package size range: up to 3...

Arpac Shrink Tunnels VT122272

• Manufacturer: Arpac
• Model: VT122272

Arpac VT122272, Inline shrink tunnel rated up to 100 feet per minute with number of product – depending on materials and application. Aperture: 12" in Height; 22" in Width. Tunnel: 72" in Length. Equipped with 92...

Samuel P-225 Automatic Strapping Machine – 091325847005A

Specifications: MOTORS: Single Phase 115 V., 1/3 Hp Chamber Feed/Strap Take-up Single Phase 115 V., 1/2 Hp Main Drive/Strap Feed

Eastey Heat Tunnel Model: ET1610-36

• Manufacturer: Eastey
• Model: ET1610-36

UNIT is USED. Some minor scratching/blemishes/left over tape/tape/sticker residue can be seen on the surfaces of the heat tunnel, but is not affecting the unit intended use. Unit was removed from a working enviro...

Preferred Packaging PP180828 Heat Shrink Tunnel 220V 40A 60Hz 1PH Top Only

• Manufacturer: Preferred Packaging

Used, in Good Working Condition, Tested OK. This is the top unit only. No conveyor. Company this came from probably just mounted on their own conveyor system. This heats up to couple hundred degrees so not just a...

Arpac Shrink Bundler 45TW28

• Manufacturer: Arpac

Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel.Equipped with 70" long x 24" wide in feed conveyor, 29" wide seal jaw with 12" vertical travel, side mounted film racks and ...

Arpac Shrink Bundler 45TW28

• Manufacturer: Arpac

Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel – speed dependent on materials, application and machie configuration. Equipped with 70" long x 24" wide in feed conveyor, 29...

Arpac Shrink Bundler 45TW28

• Manufacturer: Arpac

Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel.Equipped with 70" long x 24" wide in feed conveyor, 29" wide seal jaw with 12" vertical travel, side mounted film racks and ...

Preferred Packaging Shrink Wrapper

Preferred packaging Model PP 560 shrink wrapper 20 inch wide seal jaw by 24 inch long side seal jaw 15 1/2 inch wide belt can run Approx. 15”Wx 8 1/2 to 9” tall by 20”L package Machine Approximately 37 inch infee...

AFM Model: STC-WSN-2M | Steam Tunnel | w/ Integrated Steam Generator

• Manufacturer: AFM - American Film & Machinery

Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...

Rennco Shrink Semi Auto 301

• Manufacturer: Rennco

Rennco, model 301, semi-automatic, servo controlled, L-Bar sealer. Speed dependent on materials, application, machine configuration and operator dexterity. Package size range: 2" to 23½" in length, 2" to 13½" in ...

Poly Pack Shrink Bundler PH24

• Manufacturer: Poly Pak

Poly Pak, Model PH24, automatic, stainless steel shrink bundler. Bundle size: up to 11" in Length; up to 17" in Width; up to 9½" in Height. Equipped with a 12" wide x 116" long infeed conveyor, pneumatic push arm...