Used Sheet Metal Processing

Edwards AC0905 Heavy Duty Gauging Table Kit for Oversize Punch Assembly 40T, 50T, 55T, 60T, 65T, 75T, 100T and Elite Ironworkers

• Manufacturer: Edwards
• Model: Elite

JET Tools AC0905 Heavy Duty Gauging Table Kit for Oversize Punch Assembly 40T, 50T, 55T, 60T, 65T, 75T, 100T and Elite Ironworkers The 1" x 12" x 16" replaces the Standard Pedestal Die table to add speed and prec...

Pittsburgh Rollformer Machine Opening Rolls

• Manufacturer: PROFAB

Need new opening wheels for your Pittsburgh rollformer machine? This replacement part, when added to your Pittsburgh Rollformer Machine, will open up the Pittsburgh pocket during the rollforming process. Call our...

PROFAB Vane Pro and Rail Maker

Increase Your ProDUCTivity with the fastest Vane Machine on the market – produces 1,200 – 12″ pieces per hour! You will not find a faster rail making machine on the market! Programmable controller (PLC) means no ...

Edwards AC1055-5 241 Punch Assembly Elite 110 Ironworkers

• Manufacturer: Edwards
• Model: Elite 110

JET Tools AC1055-5 241 Punch Assembly Elite 110 Ironworkers *Shown with optional Oblong Punch and Die Set Features The 241 Punch Assembly accommodates punch & die sets in various shapes and sizes from 1" up to 4"...

Advanced Auto Fold Coil Line

Model year 2006 Advanced Auto Fold Coil Line 16 ga 60″ Coil capacity Notching for S and Drive Notching for PPC/PPF Will turn Drive Cleats Will Turn 1/4″ Male Pittsburgh and side Eject to Female Pittsburgh Comes w...

Lockformer Model 8900 Cleatformer Slip & Drive Machine

• Manufacturer: Lockformer

Used Lockformer Model 8900 Cleatformer Slip & Drive Machine Slips 22-28ga Drives 20-28ga Slitters for BOTH slip and drive Has 20 gauge Pittsburgh rolls on the outboard, 5/16″ pocket, 1″ allowance 230V, 3-Phase EX...

PPI Spiral Pipe Machine

Spiral Matic like new. 20 gauge maximum thickness 3 inch to 60 inch diameters Cutting up to 20 feet in length Variable diameters are automatically selected Very low hours of use Contact for details!

PPC / PPF Cleats

Production Products, Inc. is a stocking supplier and manufacturer of PPC and PPF 6″ Cleat Singles in 22 gauge and 20 gauge galvanized metal or 24 gauge stainless steel for HVAC sheet metal and ductwork fabricator...

Iowa Precision Corner Machine

• Manufacturer: Iowa Precision

Good Condition Model # CM-C-DHA Power Adjust from 4′ to 6′ Currently Set Up for PPC Serial # CM-0204

Iowa Precision Full Duct Line

• Manufacturer: Iowa Precision

Late 80s – early 90s (sections added at different times) Left Hand “U” Line Direction Four (4) Powered Underfed 60” 12,000 Capacity Un-Coilers Feed, Level, Bead, Pneumatic Powered Notching and Shear section – 60”...

Duro Dyne Roto Bonder

• Manufacturer: Duro Dyne

Model Used Duro Dyne Roto Bonder Voltage N/A Serial Number N/A Condition Used Comments N/A Sale Price Please for information or for similar products.

Betech Ovalizer

• Manufacturer: betech

Introducing the newest addition to your duct shop – the Betech Ovalizer. The Ovalizer turns your round, spiral ducts into flat-oval ducts, with numerous advantages over rectangular ducts: Allows for better air fl...

EZ-End Reinforced Angled Duct Adapter

• Manufacturer: PROFAB

EZ-End is a duct-stiffening adapter designed for transitional duct. It conforms to any angle from 0 – 90 degrees. EZ-End works with both 1/2″ and 3/4″ EMT. Attaches to Condu-Lock. There’s no need for two sizes! E...

2014 Iowa Precision Pro Ductomatic

• Manufacturer: Iowa Precision

4 Decoilers Leveler Beader Notcher (“S” and Drive Cleat) Cleat roller Bend and Shear (including Male Pittsburgh or Snaplock)

Flagler Pittsburgh Machine 22 Gauge

• Manufacturer: Flagler

Used Flagler 22 Gauge Pittsburgh Machine 22 Gauge Capacity Portable, with drive cleat rolls 110 Volt, Single Phase with Cord RUNS PERFECTLY!