Used Saws

2022 Behringer HBE411A Dynamic Automatic Horizontal Band Saw ()

• Manufacturer: Behringer

Imperial Metric Behringer HBE411A Dynamic Automatic Horizontal Band Saw (2022) Cast iron band guiding parts are made by Behringer and provide vibration damping directly at the cutting edge, thus increasing tool l...

1986 Hendrick SZ III-EFZ Panel Saw

• Manufacturer: Hendrick

HP 7.5 RPM 1750 Voltage 220 3 Phrase Blade size 13 1/2 Arbor size 1" Blade Travel 67" Cutting Area 11' x 67"

LESTHER JIH-20 COLD SAW

Imperial Metric Country: United States | Cutting angle: 45 - 0 - 45 DEGREE | Sawblade size: 20" X 1" BORE | Saw speed: 3,000 RPM | Motor: 7.5 HP | Worktable area: 36" X 25.5" | Worktable height from floor: 34.4" ...

SHARP Miter Band Saw Model SW-100T 10" Capacity

• Manufacturer: Sharp

SHARP Miter Band Saw Model SW-100T 10" Capacity This is a semi automatic miter saw for straight and angle cut from 90° to 45° (backwards). The swivel bed miter cutting design are great for structural steel proces...

Roll-in Saw EF1459 - The Original #8871

• Manufacturer: Roll-in Saw

Roll-in Saw 14 1/2″ x 8 1/2″ “The Original” Band Saw, EF1459 Inventory # 8871 “The Original” was the first saw in America to use a patented gravity-feed system that saves time and energy. The success of this prod...

Roll-in Saw JE1320 - The Journeyman #8872

• Manufacturer: Roll-In

Roll-in Saw 13″ x 20″ “The Journeyman” Vertical Band Saw, JE1320 Inventory # 8872 “The Journeyman” provides the strength and agility to make straight or detailed cuts on 13″ material. This saw is designed to prov...

18" x 22" DOALL TM-1822 Vertical Saw

• Manufacturer: DoAll
• Model: TM-1822

DOALL VERTICAL MODEL TM-1822 Throat: 18" | Work height: 22" | Power: 5hp | Blade width: 1.25" | Blade length: 196" | Weight approx. (lbs.): 2,800 lbs | Electrics: 480V/3PH/60H

Northtech NT HBR-250A-2 Dual-blade Horizontal Resaw Band Saw

This 250 series 20 HP (x2) dual-blade resaw from Northtech can easily handle material up to 11-3/4″ (W)” x 8″ (H). The 1″ (W) x 28″ (Dia.) wheels will securely drive both 1″ and 1-1/4″ blades. The feed conveyor i...

The Original Saw Company #9490 - 3579X20 #9490

• Manufacturer: The Original Saw Company

The Original Saw Company 20″ Metal Cutting Radial Arm Saw, 3579X20 Inventory # 9490

Grizzly "G9744Z2" Band Saw

• Manufacturer: Grizzly
• Model: G9744Z2
• Phase type: Single-phase

Grizzly "G9744Z2" Band Saw 1-1/2 hp motor 4 blade speeds 121-1/2" blade length 10" max round cutting 18" width at 90 degrees 2.5 gallon cooling capacity

Northtech NT ADS-100A Automatic Crayon Mark & Defect Saw

With feed speeds up to 240 FPM and up to 80 highly accurate cuts per minute, the NT ADS-100A processes up to 3-5 times more material than manual cut-off saws. The precision computer-controlled servo consistently ...

Roll-in Saw JM1220 - The Journeyman 1220 #8873

• Manufacturer: Roll-In

Roll-in Saw 12″ x 20″ Vertical Band Saw with Tilting Table, JM1220 Inventory # 8873 From the digital speed control to the calibrated gravity fed tilt-table, the “Journeyman 1220” sets the standard for versatility...

1992 Trennjaeger TS-3 Automatic Traversing Cold Saw ()

• Manufacturer: Trennjaeger

Trennjaeger TS-3 Automatic Traversing Cold Saw (1992) Work piece width 39.7" Workpiece height 11.81 Total power requirement 25 HP Motor power, 8 HP The industrial saw in the H-beam design from Trennjaeger has a ...