Used Punch Machines

ALLEN BRADLEY INPUT DRIVE 8600 1873L 90103540 9327B07F-RM 0S 5630 9327711 WARNTY

• Manufacturer: Fanuc

THIS PART CAME FROM A 1997 AMADA ARIES-245 CNC TURRET PUNCH PRESS THAT WE DISMANTLED.

1992 Amada Pega 357 w/ 04PC

• Manufacturer: Amada
• Model: Pega-357

Equipped with: Amadan 04PC Control, Ball Transfer Table, (2) Work Clamps, 58 Station w/ 2 Auto Index *Personal inspection of all equipment is highly encouraged* **Sold As-Is, Where-Is with no Guarantees**

1998 Amada Vipros 255 w/ 18P Control

• Manufacturer: Amada
• Model: Vipros-255

Equipped with: Fanuc 18P Control, Brush Table, (2) Work Clamps, 31 Station w/ 3 Auto Index *Personal inspection of all equipment is highly encouraged* **Sold As-Is, Where-Is with no Guarantees**

ALLEN BRADLEY CIRCUIT PROTECTOR 592-B0V16 BOV16 SER.B NEMA A600 LOT OF 3 PIECES

• Manufacturer: Fanuc

THIS PART CAME FROM A WIEDEMANN CENTRUM 3000 CNC TURRET PUNCH PRESS MACHINE WITH FANUC CONTROL WE STRIPPED

1996 Amada Pega 345 w/ 04PC Control

• Manufacturer: Amada
• Model: Pega-345

Max Travels: 40" x 50" Maximum Sheet Size (w/ Repositioning): 40" x 100" Equipped with: Amadan 04PC Control, Ball Transfer Table, (2) Work Clamps, 58 Station w/ 2 Auto Index *Personal inspection of all equipment ...

OKUMA BOARD E0241-653-002D PUNCHER RS-232-C LOT OF 3 PIECES

• Manufacturer: Fanuc

Non-domestic product: No

KKS KURODA PULCEN PC-1024CZ-WFY 14-09856

• Manufacturer: Fanuc

2002 GEKA HYDRACROP 165/S IRONWORKER

• Manufacturer: Geka
• Model: Hydracrop

8" x 8" x 3/4" ANGLE 185 TON GEKA HYDRACROP 165/S IRONWORKER PUNCH- CAPACITY 185 TON ANGLE SHEAR- ANGLES ON 45 DEGREE MITRE (LEG IN): 3" X 3" X 5/16" BAR SHAR- PLATE SHEAR- NOTCHER- ***POWERED UP AND RUNNING ***S...

Superior VA

• Manufacturer: Superior
• Model: VA

S/N: 2800-10, (VERY RARE MACHINE) 3 PH 480V Stroke: 18" | Maximum diameter: 3"

Sahinler Punching Machines

• Manufacturer: Sahinler

Previous Next General information: HPM SERIES. Punching in thick sections, CNC or manual mode, with the lowest cost per hole Available models: HPM 30/65/85/115/175 – HPM 65/85/115/175 DP – HPM 85/115/17 CNC Featu...

DICE FOR THE CORNER CUTTER

• Manufacturer: amxmachinery.com

DICE FOR CORNER CUTTER DIFFERENT DESIGNS AND SIZES They are used also to cut sheeting for corner recognition with rounded corners, etc. Each die cuts 1 design and 1 specific size. Cutting dies available: Design -...

CORNER CUTTER FOR PLAQUES AND AWARDS

• Manufacturer: amxmachinery.com

PART: 2AC-CM40A - CORNER CUTTER - FOR PLAQUES AND AWARDS - FOR METAL AND PLASTICS New with warranty Cutter cuts corners, holes and slots in plaques, badges, signs and other items. There are over 30 interchangeabl...

2005 TRUMPF TRUMATIC2020R

• Manufacturer: Trumpf
• Model: Trumatic 2020R
• Punch diameter: 76.19999999999999 millimeter

EQUIPPED WITH BOSCH CONTROL BALL TRANSFER TABLE 19 POSITION TOOL RAIL NEW LINEAR AMPLIFIER IN 2019 SPECIFICATIONS TONNAGE 20 T # TURRET STATIONS 19 WEIGHT 25000 LBS

1999 Amada Vipros 358 King II

• Manufacturer: Amada
• Model: Vipros-358

The Amada Vipros 358 King II is known for its high-speed punching capabilities, making it suitable for processing light gauge sheet metal. It features a large auto-index turret, which allows for efficient punchin...

Trumpf TruPunch 1000 Punch Machine

• Manufacturer: Trumpf
• Model: TruPunch 1000

Good condition Trumpf TruPunch 1000 Punch Machines available between 2007 and 2019 years. Located in Italy and other countries. Click request price for more information.