Used Processing in Missouri, USA

SPEEDAIRE MODEL 52658 REFRIGERATED AIR DRYER; S/N MMG1017219, R-22 REFRIGERANT, SINGLE PHASE, 120

• Manufacturer: Speedaire

SPEEDAIRE MODEL 52658 REFRIGERATED AIR DRYER; S/N MMG1017219, R-22 REFRIGERANT, SINGLE PHASE, 120 VOLTS - Located At 315 Madison Street, Scott City, MO 63780

SILVAN VERTICAL STANDING AIR RECEIVING TANK - Located At 315 Madison Street, Scott City, MO 63780

• Manufacturer: Silvan

SILVAN VERTICAL STANDING AIR RECEIVING TANK - Located At 315 Madison Street, Scott City, MO 63780

48" WIDE X 3/4" THICK USED RUBBER CONVEYOR BELT, 4,200 LB. BELT WEIGHT - Located At 315 Madison

48" WIDE X 3/4" THICK USED RUBBER CONVEYOR BELT, 4,200 LB. BELT WEIGHT - Located At 315 Madison Street, Scott City, MO 63780

2023 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

• Manufacturer: Econoline

Air Regulator & Gauge Safety Switch Dust Collector Foot Pedal Nozzle Safety Gloves

Peerless 36 inch Twin Shaft Pugmill Plant

• Manufacturer: Peerless

Peerless 36" Twin Shaft Portable Pugmill Plant Detroit Diesel Engine Bituminous Pump For Making Cold Mix Asphalt Water Pump To Do Pug Mix (Have To Swap Out) Mounted On Single Axle Dual Tire Carriage W/Eye Hitch F...

2004 FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. 510140

• Manufacturer: Furukawa

(2004) FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. (2004) Furukawa 1200ED with 12,764 frame hours (Re-man engine @6874 hrs) and 6046 impact hrs (resealed @ 5724hrs). 5.9 Cummins engin...

2002 TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS 510136

• Manufacturer: Tamrock

(2002) TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS (2002) Tamrock 700-2 hydraulic drill with 6876 hrs on Cat 3126 engine and 2981 impact hours. Set up for T45 steel with rod changer. Overall, go...

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR 162013

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR Shopbuilt 30″x50′ truss conveyor with 3x3x1/4 main cord & 2x2x1/4 lattice. 45 degree idlers, 2-ply belt, lagged head pulley, wing-tip tail pulley, & gearbox (no motor). Good con...

JOY MS-2A 530020

• Manufacturer: Joy

Year: MS-2A air track drill with Joy VCR360 hammer, square boom, operator noise sheild, and operator controls. Includes dust collector, but not installed. Drill is ready for work.

BARBER-GREENE 30″ X 42 162009

• Manufacturer: Barber Greene

Year: 3 sets of legs and 20″ OD wing tail pulley. Conveyor has 20 degree Marco idlers and Dodge TD-7 gearbox and electric motor. Wiring and starters included. Good condition.

Smithco super liner

• Manufacturer: Smithco

Smith co super liner 44-801 has been used quite a lot on campus but is still in operating condition. Manual is included with machine. Please read all the terms and conditions before bidding. Under no circumstance...

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

Cartridge Filters

Cartridge filters, stainless steel. Quantity (2) - priced for the set

AC Compressor Corp D24JR

• Manufacturer: AC Compressor Corp

Inlet volume: 49,375 ACFM. Serial number 1634-11461. Rated speed: 6012 RPM, temperature: 217F, pressure: 15 PSIA. Discharge pressure: 22.9 PSIA. Removed, ready to load on your truck.