Used Processing in Japan

［Sumitomo] Motor with Bayer cyclo reduction gear No model
- Manufacturer: Sumitomo
Power: 2.2Kw | Material: SS | Quantity saved: 1
Hiroshima, Japan
［Sumitomo] Geared motor No model
- Manufacturer: Sumitomo
Cyclo Reduction Gear Reduction ratio 1/21 Power: 5.5Kw4P400V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Sumitomo CHHM3-6160DC-AV-231
- Manufacturer: Sumitomo
2.2kw/4P/200V Deceleration ratio: 1/231 Power: 2.2kw/4P/200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
［Motor with reduction gear No model
- Manufacturer: Daiichi Bussan Co.
11kw/4p/440v Reduction ratio: 1/12.41 Quantity saved: One
Hiroshima, Japan
2018 Mitsubishi XF-TF
- Manufacturer: 三菱
75kw/4p/440v Explosion-proof (d2G4), made in 2018, unused
Hiroshima, Japan
Mitsui Miike MIE 70/50-FVD
- Manufacturer: Mitsui Miike
55/37kw/400V Pole change motor For Henschel Mixer Power: 55 / 37kw | Quantity saved: One
Hiroshima, Japan
Sumitomo CHHM 3-4135-29
- Manufacturer: Sumitomo
2.2kw 1800rpm RATIO:1/29 Power: 2.2kw | Quantity saved: 1
Hiroshima, Japan
2010 G-TECH 1456/3 type
- Manufacturer: G-TECH
Centrifugal effect: 3150G Left speed rotation: 4-48rpm Acceleration time: 2-3min Wetted parts: SUS316 Wear-resistant with 2 pumps. The product is made in Australia, but we provide full support. No operation panel
Kure, Japan
Hata Ironworks HU-RG
- Manufacturer: Hata Ironworks
Main electric motor 0.75㎾ Built-in motor with stepless speed change Main unit weight: approx. 180 kg This is a dry type granulator that crushes tablets and other solids to make them into dependable granules. This...
Kure, Japan
1985 Matsumoto Kikai MARK III 48×36
- Manufacturer: Matsumoto Machinery
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
2010 Silo
Total volume: 30m3 Diameter: 2900φ×5850H Drawings available
Kure, Japan
2008 Izumi Food Machinery NPW30F06-042-6-H type
- Manufacturer: Izumi
Tubes in shell-and-tube heat exchanger replaced by All welded plate & tube heat exchangers Shell and tube heat exchanger Material is under investigation
Kure, Japan
Alfa Laval SSG509
- Manufacturer: Alfa-Laval
Power: 3.7KW 200V Rotation speed: 1800rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Wet part: SUS M...
Kure, Japan
2000 Nippon Carbon Special BZ661MCN1S8
- Manufacturer: Made in Japan Carbon
Where to use: Chemical factory | Heat transfer area: 23.3m2 | Design pressure: FV to 2kPaG | Design temperature: 150℃
Kure, Japan
Showa Kakoki TA5570
- Manufacturer: Showa Kakoki
Where to use: Chemical plant Food plant Feed and fertilizer plant Environmental recycling plant Crushed stone plant Water treatment plant | Whole picture: 1500L SUS304 | Cylindrical vertical thickness: 5mm
Kure, Japan