Used Processing in Canada

Immersion Blender

-5 Foot shaft on mixer -90 inch overall height Pneumatic lift Explosion proof

2,410 Litres stainless steel tank

-On 4 stationary legs that are adjustable, rughly 42” tall -Cone bottom with dimples -Port on very bottom is 3”, two other drains on the bottom both 2” -Tri clamp ports at the bottom side are 2” -Cone top -Man ho...

Nettco Clip-on Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Model: NSPG-050 -SN: P72311A-1 -Motor: -HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -Hz: 60 -Phase 3

Pneumatic Vibrator

• Manufacturer: Netter

-Shipping dimensions: 5" L x 3" W x 8" H -Netter PKL 135

Small Filter Cavity

• Manufacturer: GAF

-Manufacturer: GAF Filter Systems -SN: 1829 -Connections: 1 1/4" NPT -Max oper pressure: 300 psi -Max oper temp: 225 degrees F -Length of cavity: 16" -Diameter: 5"

Stainless Auger

-Shipping dimensions: 213" L x 20 " W x 27" H -10" D x 17' 4" L -8 1/2" Flite Spacing -10 1/2" has hinger cover -10" x 10" discharge c/w valve -Stainless auger -Steel legs

Tablet Polisher Deduster

• Manufacturer: LSC-C

-Shipping dimensions: 30" length x 12" width x 31.5" height -Has speed control -Made in Beilun

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

Vac-u-max motor head

• Manufacturer: VAC-U-MAX

-115 volt -Shipping dimensions:14”x14” x 13” height -Does not have filter

Steel filter housing

Shipping dimensions: Height - 10" x Width - 7" x Length - 7 1/2" Input / output - 1 1/2" (2 Of 2)

Portable Forced Air Heater

• Manufacturer: Stelpro

-Shipping dimensions: length 11" x width 11" x height 14 1/2" -Model: SCH48T -Watts: 4800/3600 -Phase: 1 -Volts: 240/208 -Hz: 60

Paddle Blender

• Manufacturer: Falk

Motor 30 HP, 550 VOLT Dimensions 58'' DIAMETER x 60'' LONG Output rpm 28 Previous use FLOORING COMPOUNDS Overall dimensions 72'' W x 96'' L x 88'' H Cubic feet total capacity ...

Cyclone dust collector vessel

-Cyclone dust collector vessel on stand -Legs 83” tall -Bottom shoot: 6” diameter -Top 2 shoots: 7” diameter -H 122” x W 49” x L 49” -Diameter of Cylinder: 24 1/2" -Height of cylinder: 40" -Height of cone: 38 1/2"

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Blower

-Shipping dimensions: Width 13 1/2" x Height 16 1/2" x Length 17" -HP .25 -V 200 -3 Phase -Hz - 50 / 60 -19 kg

Frick XJF-151 Industrial Compressor

• Manufacturer: Frick
• Model: XJF-151

Good condition Frick XJF-151 Industrial Compressors available between 2005 and 2007 years. Located in USA and other countries. Click request price for more information.