Used Machine Tools in Texas, USA

Boniardi Mirror Mesh Finishing Machine with Adjusted Diamond Milling Tools CNC, Metalworking & Manufacturing

• Manufacturer: Boniardi

“In good working condition - removed from working environment” Boniardi Mirror Mesh Finishing Machine with Adjusted Diamond Milling Tools, Motorized Spindle and Table, 220V, 3 Phase This is a beautiful unit with ...

32" 3 Jaw Chuck #7890, 10.5" Thru hole with A-15 Mount

A-15 Mount

DS 320 4-Station Closing Unit

• Manufacturer: DS

DS 320 4-Station Closing Unit - (8) 10 Gallon Bottles - Triplex Pump with Electric Motor - (2) Air Pumps - 14'L Fuel Tank - 4 Compartment Lubester - Storage Comopartment - 30' Skid

CINCINNATI om

• Manufacturer: Cincinnati
• Model: OM

METERING SKID

METERING SKID, GAS FUEL, FLOW RATE 17MMSCFD, OPERATING PRESSURE 290-1200PSIG, OPERATING TEMP 50-100 DEG F (PO 411512396) (BOP-078-20454), Located in Houston, TX

John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM

• Manufacturer: John Crane

John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM, Cartridge Type 87479165-EL, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 USG (16.2 Bar (g), Volume, 235 PSI(g) Design Press...

John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM

• Manufacturer: John Crane

John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM, Cartridge Type 87479165-EL, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 USG (16.2 Bar (g), Volume, 235 PSI(g) Design Press...

PRE FILTER

PRE FILTER, DUPLEX, LIQUID FUEL,120 GPM (PO 411512027) (BOP-028B-20454) (Located in Houston, TX)

John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM

• Manufacturer: John Crane

John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM, Cartridge Type 87479165-EL, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 USG (16.2 Bar (g), Volume, 235 PSI(g) Design Press...

Never Used 2017 700 HP GE Oil & Gas Gas Fuel Compressor Skid

Never used 2017 700-HP GE Oil & Gas Gas Fuel Compressor Skid with 700-HP Westinghouse Global XPE Severe Duty 1487 RPM 3300 Volt, 3PH, 50HZ electric motor. Features four Size 6.00 90-A35 3.50” stroke, 6” liner bor...

32” 3-Jaw Chuck with 36” Adapter Plate

• Manufacturer: Harris Machine Tools

36" Adapter Plate Included Note: All Specifications Subject to Verification

Tanshing MRNG-400

• Manufacturer: Tanshing

Equipped with: 16" 4-Jaw Chuck

34" (860 mm) Rohm Hydraulic Indexing Chuck with Hydraulic Power Unit

• Manufacturer: Röhm

Equipped With: Hydraulic Power Unit Chuck diameter: 34" (860 mm)

GIDDINGS & LEWIS CFF 26

• Manufacturer: Giddings & Lewis

Diameter: 26" | Through hole: 5" | Feed range: 0.0029 - 0.0392