Used Machine Tools in Oregon, USA

SAFETY SPEED CUT Model 7400 Vertical Panel Saw

One Used SAFETY SPEED CUT Model 7400 Vertical Panel Saw (American made) Standard Equipment � 3 Hp continuous duty induction saw motor, 7.6 amps 230 volt 3 phase with optional Scoring Blade � Maximum crosscut 6...

New Oliver Cut-Off Saw, Model 5015.002 14" Cut Off Saw

One (1) New Oliver Model 5015.002 14" Cut Off Saw with 7-1/2HP 3 phase dual voltage motor prewired for 230 volts. 4100 RPM arbor speed. Left Hand Model uses a 14" diameter saw blade with 1" bore. Cuts boards u...

Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw

• Manufacturer: Wadkin - Bursgreen

Used Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw, S/N 87333. 12" diameter blade tilts either left or right 45�. 3-1/2" tall fence opens 26" right of saw and left stops go out to ...

Simonds Automatic Bandsaw Leveler Model Optimatic RMO 880-2

Simonds Automatic Bandsaw Leveler Model Optimatic RMO 880-2 (Built by Walter Oppliger-Switzerland for Simonds). See photos of Simonds Automatic Bandsaw Leveler on our web site. Inventory No. 11245C-F.

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift. 7-1/2 HP (?) 208-230/460V motor, 2" X 12" capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimu...

Grutter Model 1603 High Speed Air Operated Upcutting Chop Saw

Grutter Model 1603 High Speed Air Operated Upcutting Chop Saw. 12" Capacity. 7-1/2HP (?) 220/440Volt motor. See photos of Grutter Model 1603 High Speed Air Operated Upcutting Chop Saw on our web site. Invento...

Grutter Model 1600, 8" Capacity Air Operated High Speed Upcutting Chop Saw

Grutter Model 1600, 8" Capacity Air Operated High Speed Upcutting Chop Saw, 7-1/2HP 220/440V Motor (?). See photos of Grutter Model 1600, 8" Capacity Air Operated High Speed Upcutting Chop Saw on our web site. ...

Tri-State Chop Saw, Model 18RHA 2"x12" Capacity Air Operated Chop Saw

Tri-State Model 18RHA 2"x12" Capacity Air Operated Chop Saw. See photos of Log Kicker Assembly on our web site. Inventory No. 11341C. Located at our Portland, Oregon facility.

Precision Chop Saw, 18LHA 2"x12" Capacity Air Operated Chop Saw

Precision 18LHA 2"x12" Capacity Air Operated Chop Saw. See photos of Precision 18LHA 2"x12" Capacity Air Operated Chop Saw on our web site. Inventory No.11975C. Located at our Portland, Oregon facility.

Armstrong Bandsaw Sharpener, No. 2 Left Hand Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Model Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener. For saws up to 8" wide. Complete with a set of post brackets, motors, starters, and one set of standard cams. Good condition. See photos of Later M...

Griggio Bandsaw, Griggio SNAC 940 Bandsaw, S/N M2999

• Manufacturer: Griggio

Griggio SNAC 940 Bandsaw, S/N M2999. 37" diameter (940mm) wheels operate at 550 RPM. 7.5HP/5.5KW. Maximum depth of cut is 22" (560mm). Maximum width of cut inside saw is 35-3/4" (910mm). Table size is 31-1/2...

New Crosscut Solutions Cut-Off Saw, Model CS14M Cut-Off Saw

One New Crosscut Solutions Model CS14M Cut-Off Saw (left hand). Mechanically operated, 2" x 8" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3-phase, 60 cycles, magnetic starter with 110 volt control voltage, adju...

Armstrong Bandsaw Sharpener, No. 4 Left Hand Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 4 Left Hand Bandsaw Sharpener, S/N 9304. No stands, cams, or filing clamp (but they are available at additional cost). See photos of Armstrong No. 4 Left Hand Bandsaw Sharpener on our web site. I...

Precision Cut-Off Saw, Left-Hand Model 23 Pneumatic Cut-Off Saw

Precision Left-Hand Model 23 Pneumatic Cut-Off Saw, Serial No. 280192A, new 7/83, 5 HP, 2x8 capacity, with blade. Missing air lubricator, foot switch and pushbutton. Needs repair. See photos of used Precision L...

Mid-Oregon Cut-Off Saw Left-Hand Mechanical

Mid-Oregon Left-Hand Mechanical Cut-Off Saw, Serial No 22875-1734L; new in 5/90. 7-1/2 HP motor 14" diameter blade 2x8 capacity with foot pedal control. Appears to be in good condition, missing side cover. See ph...

Amada VT4555M Saw

• Manufacturer: Amada
• Model: VT4555M

Good condition Amada VT4555M Saws manufactured in 2021. Located in USA and other countries. Click request price for more information.