Used Heat Exchangers in Utrecht, Netherlands

Tubelar heat exchanger

Monotube. Straight design. 2 Tubes, 1 section. Length: 1,5 mtr. 1'' , 1,5'' and 2'' tube in each other (triple tube). The inner tube 1,5'' is for product. Connection: product: 1'' DIN, service: 1'' DIN. Placed on...

Plate heat exchanger

Plate heat exchanger, not sanitary. 1 section with 19 plates. 4 in-/outlets of 22 mm. Total dimensions 40 x 25 x 50 cm.

Insulated Tube Heat Exchanger

Insulated tube heat exchanger, Monotube, 13tubes of 6mtr long, surface ±: 4.9m2 total surface, dimensions total unit 6,200 mm x 400 mm x 1,300 mm, 6bar, 150°C max,

Het Stempel BV Tube heat exchanger

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE) and static mixer to have optiomal heat exchanging. Monotube, 1 compartment, Straight design with swirls, 4 tubes, 1 section, Length: 2 mtr, outer diameter 38 mm, inner diam...

TSA Tubular heat exchanger

Tubular heatex changer. 52 tubes -Length tubes: 130 cm -Diameter tubes Ø 20 mm. '' Conn "Steam DN50- Product 2x DN65.

Ritter Tubular heat exchanger

• Manufacturer: Ritter

Total Dimensions: L 323cm x H 40cm x L 323cm, Product chamber: operating pressure +6 bar, 60Liter, + 180 ° C, Jacket Chamber, 33L, + 90 ° C, operating pressure +6 Bar.

1989 Wilhelm Deller heat exchanger

• Manufacturer: Wilhelm Deller KG

Hotwater prepartion unit, volume 1175 ltr, 80 ° C, pressure 5 bar. Jacket volume 13.5 ltr, 175 ° C, pressure 8 bar.

1993 Alfa Laval plate heat exchanger

• Manufacturer: Alfa-Laval

Alfa Laval plate heat exchanger. 1 section - 50 plates - max 30 bar - Capacity 6.00/ 6.25.

Alfa Laval Contherm 6x9"

• Manufacturer: Alfa-Laval
• Model: CONTHERM 6X9

1x Scraped surface heat exchanger, dismanteled, excluding hydroset elevator construction, drive motor or frame. including Rotor and plastic scraper blades, cast product heads and Nickel plated cylinder. (Suitable...

Armfield FT 43-A-A

• Manufacturer: Armfield

Armfield Laboratory Pasteurizer FT 43A. With controls. Set consists out of feed tank, pump, plate heat exchanger, hot water tank, pump, holding and diverter valve. Total dimensions: 76x55x65 (lxwxh) cm - weight ...

APV 3HD672

• Manufacturer: APV

Scrape surface heat exchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure ...

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heat exchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

2006 Tetra Pak/Alfa Laval MS6-SR

• Manufacturer: Alfa-Laval
• Model: MS6-SR

Plate heat exchanger, sanitary (PHE). Design pressure: 6,0 bar. Beam length: 74,5 cm, connections: 2" SMS. Current configuration: 1 Section: 30 plates - Connections head: 2 up/2 down, follower 2 up. Total dimens...

Crepaco 1VT422

• Manufacturer: Crepaco

Scraped surface heat exchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1,500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube ...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connection:...