Used Industrial Furnaces & Ovens in Wallonia, Belgium

1987 Treatment furnace, electricTHERMCO, 750 °C

• Manufacturer: Thermco Systems

Type: FTT750, serial number: 86456 Year: 1987, weight: 1800 kg With 1 ventilater- aerater behind (1.5 kW; 220/380 V; 1400 rpm) With 1 charging basket on wheels, 1300 mm x 580 mm x 500 mm Manual hand lift door wit...

Laboratory treatment furnace 1000°C HERAEUS

• Manufacturer: Heraeus - Hanau - Vötsch

With thermostat and thermometer In overhauled condition

Exhauster for cupola furnace, 13020 m³/h

WERRA VENTILATOREN Type: R217/1750, serial number: 3423 Year of construction: 1975, weight: 1500 kg In very good condition Isolated, 10 cm glass wool all around

2016 ElectricTreatment furnace for aluminium NABERTHERM with curing pool

• Manufacturer: Nabertherm

Dimensions extérieures: length ± 4000mm, width ± 3600mm, height 6900mm Inner dimensions: length 1800mm, width 1800mm, height 1750mm Useful dimensions: length 1500mm, width 1500mm, height 1350mm Bell furnace with ...

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

1997 Fixed gas melting furnace for aluminum THERMCO

• Manufacturer: Thermco Systems

Melting area dimensions: Length: 2450mm; Width: 1300mm; Height: ±2200mm With charging skip 2 outlet chutes with with plug system Telemecanique control With CE mark

fixed bale-out crucible furnaces HINDENLANG, 200 kg aluminium

• Manufacturer: Hindenlang

Type SLEP200 Year of construction: 1987, serial numbers: 7164 + 7166 For 71 l = 213 kg alu with control box and cover , max.temp.720 °C celsius melting capacity +- 80-90 kg/h.

1979 Pouring furnace ABB, 15 t, type OCC150

• Manufacturer: ABB

Electric pouring furnace Pouring furnace: SERT, year of construction 1989 (modernised and overhauled in 2005) Hydraulically movable (follows the AMC) With cooling tower

Warm holder furnace, channel inductor ASEA 45/62 t

• Manufacturer: Asea

Composed of: - 1 furnace - 3 inductors - 1 cooling unit with pumps - 1 furnace control system - 1 hydraulic unit - 1 spare hydraulic cylinder

Induction furnace INDUCTOTHERM 3+5t; 2250kW

• Manufacturer: Inductotherm

With 2 furnace bodies: With power cabinet POWER TRACK VIP 600V With control panel With 1 power isolation transformer With open cooling tower MITA With hydraulic unit With water pumping station and heat exchanger ...

1982 Electric melt-and tilting furnace KOPO, 500 kg, brass

Type: T500, serial number: 147 100 KVA, 80 kW, 380V, 50 Hz For crucible, type TP12 Melting capacity for cold furnace: 5 hours, warm furnace: 4 hours For 500 kg copper With command box and hydraulic unit

2001 Electric treatment furnace PADELTHERM 650°C gas

• Manufacturer: Padelttherm

Heated with natural gas CE mark on the oven Weight: 5100 kg | Electrical voltage: 400V /50Hz/ 107,5A | Control voltage: 230V | Power: 72kW | Max temperature: 650°C

Fixed melting furnace MORGAN electric 200kg

• Manufacturer: Morgan

Dimensions: Length: 1200mm; Width: 1200mm; Height: 1400mm With control 42KW; 400V; 70A; 50Hz With lid and temperature sensor With CE label

Induction furnace INDUCTOTHERM VIP350, 500 kg

• Manufacturer: Inductotherm

Internal dimensions (without refractory): Depth: 730mm; Ø620mm With hydraulic unit Without cooling tower With water pump With 2 crucibles for alternative working With copper rails One crucible without lining

Laboratorium treatment furnace HERAEUS, max. 1000 °C

• Manufacturer: Heraeus - Hanau - Vötsch

Type: MR170E, serial number: 8201585 3 kW, 220 V mono With thermometer und thermostat