Used Forging

Trusted Seller
3.15 tons Hammer Forging Hydraulic Lasco KH315
- Manufacturer: Lasco
- Model: KH315
Capacity : 3.15 tons, Energy of blow : 3150 kgm, Falling height : 1100 mm, Weight of falling ram : 2900 kg, Max. weight of die : 530 kg, Way between slides : 700 mm, Motor power : 40 KW, Total height : 682...
Europe
Trusted Seller
1 ton Hammer Forging Pneumatic Huta MPM1000A
- Manufacturer: Huta Zygmunt, Polish
Forging Hammer CM1250 made by Progresul Braila - Romania Capacity : 1 ton, Nominal forging energy: 3600 kgm /36 KJ/, Ram stroke : 800 mm, Number of strokes : 110, Dimensions: - Length : 2600 mm, - Width : ...
Europe
Trusted Seller
3.5 tons Hammer Forging Pneumatic Huta MPM3000
- Manufacturer: Huta
Capacity : 3.5 tons, Weight of the ram : 3570 kg, Ram stroke : 1000 mm, No. of stroke per min : 90, Shut height till ram : 750 mm, Shut height till table : 1050 mm, Min. height of the models : 350 mm, Max....
Europe
Trusted Seller
1 tons Hammer Forging Pneumatic MPM3150B Huta
- Manufacturer: Huta Zygmunt, Polish
Capacity : 1 ton, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in the cushio...
Europe
Forging rolls Erfurt RW1 D
- Manufacturer: Erfurt
Type Forging rolls Manufacturer Eumuco Model RW1 D Max. Dia of Workpiece 55 mm Diameter of Rolling Segment 370 mm Usable width of middle roll 500 mm Usable width of outer roll 160 mm Max length of working ...
Germany
Trusted Seller
3 tons Hammer Forging Open Die Pneumatic Romanian
- Manufacturer: Romanian
Capacity : 3 tons, Ram weight : 3150 kg, Total height above the foundation : 6185 mm, Height above the ground : 5975 mm, Width of the hammer : 2500 mm, Length of the hammer : 4935 mm, Table of the gabot : 4...
Europe
Trusted Seller
1 ton Hammer Forging Pneumatic Huta MPM3150C
- Manufacturer: Huta Zygmunt, Polish
U-Frame Capacity : 1 tons, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in ...
Europe
Trusted Seller
2 tons Hammer Forging Open Die Pneumatic Romanian
- Manufacturer: Romanian
Capacity : 2 tons, Ram weight : 2000 kg, Max. ram working : 1200 mm, Height of the working area : 530 mm, Distance between three uprights : 2300 mm, The distance from the level the lower anvil from the groun...
Europe
Trusted Seller
2.5 tons Hammer Forging Pneumatic Huta MPM2000A
- Manufacturer: Huta Zygmunt, Polish
Forging Hammer CM2500 made by Progresul Braila - Romania Capacity : 2.5 tons, Weight of the ram : 2480 kg, Ram stroke : 950 mm, No. of stroke per min : 90, Shut height till ram : 650 mm, Shut height till ta...
Europe
Sakamura
- Manufacturer: Sakamura
Name: Sakamura | Age: 1996 | Hydraulics: — | Force: 1000 ton | Pressure: —
Schilde, Belgium
Trusted Seller
0.75 tons Hammer Forging Pneumatic Huta MPM1600B
- Manufacturer: Huta Zygmunt, Polish
Capacity : 0.75 tons. Energy of blow : 18.4 KJ, Weight of falling part (without die) : 690 kg, Max weight of upper die : 200 kg, Weight of anvil block without die holder : 12.5 tons, Weight of hammer with an...
Europe
Trusted Seller
1 ton Hammer Forging Open Die Pneumatic Stanko M418
- Manufacturer: Stanko
- Model: M418
Capacity : 1 ton, Blow energy : 2700 mkg (27 kJ), Ram stroke : 950 mm, Number of strokes per minute : 95 1/min, Overhang : 800 mm, Ram weight : 1000 kg, Anvil weight : 11.8 tons, Driving power : 45 kW, 380...
Europe
Trusted Seller
1 ton Hammer Forging Pneumatic Huta Zygmunt, Polish MPM1000
- Manufacturer: Huta Zygmunt, Polish
Capacity : 1 ton, Falling part weight : 1230 kg, Blow energy : 3500 kgm, Stroke per min. : 110, Max. ram stroke : 900 mm, Approx die size : 460 x 700 mm, Approx. weight of anvil in : 22.5 ton, Approx. tota...
Europe
Sakamura
- Manufacturer: Mitsui Seiki
Name: Sakamura | Age: 2007 | Hydraulics: — | Force: 800 ton | Pressure: 0.6 MPa | —: 32
Schilde, Belgium
Trusted Seller
75 Kg STANKO M41-29A SELF-COMPRESSING DRUM HAMMER
- Manufacturer: Stanko
Weight of falling ram: 75 Kg | Energy of blow: 140 Kg/m | Stroking rate: 210 s.p.m. | Max. stroke: 365 mm | Depth of throat: 300 mm | Striking surface: 145 x 65 mm | Working height above ground: 775 mm | Motor: ...
Peschadoires, France