Used Forging Presses

360 Ton Mecol Hot Forging Press Cell #2

• Manufacturer: Mecol

MANUFACTURER – MECOL SERIAL NUMBER – 22-1759 TONNAGE – 360 TON (3600 KN) STROKES PER MINUTE – 55 STROKE - 300MM DISTANCE BETWEEN THE CENTERS – 1000MM SHUT HEIGHT ADJUSTMENT – 480MM ADJUSTMENT OF RAM- 90MM CUSHION...

360 Ton Mecol Hot Forging Press Cell #1

• Manufacturer: Mecol

MANUFACTURER – MECOL SERIAL NUMBER – 22 - 1844 TONNAGE – 360 TON (3600 KN) STROKES PER MINUTE – 55 STROKE - 300MM DISTANCE BETWEEN THE CENTERS – 1000MM SHUT HEIGHT ADJUSTMENT – 480MM ADJUSTMENT OF RAM- 90MM CUSHI...

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line

• Manufacturer: Hydromec HF4000

MANUFACTURER – HYDROMEC YEAR – 1997 SERIAL NUMBER – 445 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (SINGLE STROKE) – 35-45 RAM ADJUSTMENT RANGE – 100MM ...

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line

• Manufacturer: Hydromec

MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE...

1973 DIGEP EK-13AM

• Manufacturer: DIGEP

code 1363 DIGEP EK-13AM Recoil Hammer Features: impact energy 13000 kg Weight of the forging piece min 13 Max 50 kg Maximum number of shots 50 Average number of hits from 8 to 16 Total stroke of the hammer...

Press Hot Forging Massey

• Manufacturer: Massey

Capacity : 2000 tons, Stroke : 300 mm, Stroke per minutes : 70 , Journal diameter : 490 mm, Shaft diameter at eccentric : 790 mm, Ram (left to right) : 1015 mm, Ram (front to back) : 915 mm, Between column...

Press Hot Forging Ajax

• Manufacturer: Ajax

Capacity : 1300 tons, Stroke : 250 mm, Ram Face L-R : 780 mm, Ram Face F-B : 780 mm, To Knockout Stroke : 32 mm, Ram To Table : 762 mm, Nominal Mechanical Stroke : 41 mm, Table To Floor : 750 mm, Die Seat...

Press Trimming Massey

• Manufacturer: Massey

Capacity : 450 tons. Item condition: Good condition | Capacity tons: 450

2006 Skoda Open Die Forging Press CKV 6300 Ton

• Manufacturer: Skoda

This hydraulic press features a four-column, push-down design with all press cylinders, moving parts, and guide systems positioned above floor level. It underwent a complete reconstruction in 2006, ensuring long ...

1968 PELTZER & EHLERS MODEL VLP 450

• Manufacturer: Peltzer & Ehlers

Equipped With * 3 Stage Forging press * Including Elotherm Induction Heating 500V, 1000Hz, 800kW

GRABENER GKN 400/1000/450

• Manufacturer: GRABENER

Equipped With Mode of operation: Mechanical | Pressing power: 400 t | Hub stroke: 400mm | Strokes per min: 16-30 | Shut height: 1160mm | Die weight: max 3000 kgs. | Capacity: 55kW | Total weight: 43 t | Dimension...

1300T NATIONAL MAXIPRES FORGING PRESS

Capacity: 1300T | Stroke: 254 mm | Table adjustment: 13 mm | Continuous stroking rate: 80 s.p.m | Daylight: 590 mm | Table area: 1041x890 mm | Ram area: 787x787mm | Motor: 75HP | Width:: 3277 mm | Depth:: 2970 m...

300T FORGING PRESS ROVETTA FO300

• Manufacturer: Rovetta

Capacity: 300T | Stroke: 260 mm | Ram adjustment: 100 mm | Continuous stroking rate: 50 s.p.m | Shut height: 520 mm | Distance between uprights: 950 mm | Table: 930x1030 mm | Ram: 750x800 mm | Motor: 25 HP | Cus...

200T FORGING PRESS ROVETTA F200

• Manufacturer: Rovetta

Capacity: 200T | Stroke: 180 mm | Table adjustment: 15 mm | Continuous stroking rate: 120 s.p.m | Shut height: 370 mm | Distance between uprights: 610 mm | Table: 500x550 mm | Ram: 440x440 mm | Motor: 11 KW | Wi...