Used Forging Presses in Lombardy, Italy

EUMUCO FORGING PRESS 1000 ton

• Manufacturer: SMS Eumuco

Ton: 1000 | Table - width (mm): 850 x 900 | Number of strokes/min: 100 | Subtype (dm/cdc): DM | Ce mark: no | Revision: last 2010 | Slide - stroke (mm): 250 | Drive system (eccentric/link motion/knucle joint/hyd...

ROVETTA PRESS S2 400

• Model: S2-400

ROVETTA 09942 TWO-POST MECHANICAL PRESS Nominal force: kN 4000 Slide stroke: mm 300 Strokes per min: no. 18 Working table dimensions: mm 1600 x 1220 Vertical clearance: mm 505 Slide height adjustment: mm 200 Tota...

FORGING MACHINERY CHUN ZU CH-10LL operational

• Manufacturer: Chun Zu

CHUN ZU CH-10LL DOUBLE STROKE HEADERS Max cut-off diam.: 10 mm. Max cut-off length of shank: 193 mm. Max shank length of blank: 153 mm. Speed: 70 ppm Complete with lots of tooling

COLD FORGING MACHINERY NATIONAL 61MS operational - Double-Stroke Headers

• Manufacturer: NATIONAL MACHINERY

COLD FORMIN MACHINE NATIONAL MACHINERY 61MS Operational - Fully Functional Double Stroke Header Year: 1986 Technical information: Number of dies: 1 Number of punches: 2 Pieces per minute: 400 Cutoff diame...

FORGING MACHINERY CARLO SALVI 873/SV - 1 DIE 2 BLOW

• Manufacturer: Carlo Salvi

CARLO SALVI 873/SV rebuilt as new Max wire diameter 9mm Max length under head 100mm Max cutoff length 125mm Pieces per minute 250

COLF FORGING LIAN TENG YH15 1 DIE 2 BLOW

• Manufacturer: LIAN TENG

COLD FORGING MACHINERY LIAN TENG YH15 1 DIE 2 BLOW excellent conditions - operational Blank diam. max: 6 mm. Blank Length max: 76 mm. Stroke: 120 mm.

COLD FORGING MACHINE CARLO SALVI RF/550/SV REFURBISHED LIKE NEW

• Manufacturer: Carlo Salvi
• Model: 550SV

COLD FORMING CARLO SALVI RF/550/SV Completely Refurbished like NEW by HBR srl Possibility of having the version RF with semi tubular group Machine with quick change system on K.O. cams To be seen in our mecha...

FAVOLE PRESS 1000 TON

FABLES 10138 FAVOLE OLEODYNAMIC PRESS mod. DM 1000/250T Nominal adjustable force 1,000 Ton Nominal return force 180 Ton Maximum preblade reaction force 250 Ton Approach speed upper moving table mm/s 350 Working s...

TMP VORONEZ 1000 ton

• Manufacturer: TMP VORONEZ

Ton: 1000 | Table - x (mm): 930 | Slide - stroke (mm): 250 | Table - width (mm): 930 | Number of strokes/minute: 90 | Frame (h/c): H FRAME | Inspection: YES | Conditions: WORKING | Activation system (eccentric/l...

TRANSFER HEADER COLD FORMING SACMA SP150 Operational

• Manufacturer: Sacma

SACMA SP150 Good condition Operational - fully functional - actually working Progressive cold forming machine - 4 DIE Year: 1981 - rebuilt in year 2016 Available for any test Supplied with: - controll proce...

THREADIN MACHINE E.W. MENN GW32 REFURBISHED acc. CE Standards

• Manufacturer: EWMenn
• Model: GW32

Flat die threading machine E.W. MENN GW32 Completely overhauled acc. CE Standards New Guides, new vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M4x50/30 mm. 750 ppm To view...

COLF FORMING MACHINE FIDE EF-180 REFURBISHED acc. to CE Standards - d.14x200 mm. - 1D 2B

• Manufacturer: Fide

COLD FORMING MACHINE FIDE EF-180 Refurbished acc. To CE Standards for long screws until 200 mm. 1 DIE 2 BLOW Range production: d.14x200 mm. Speed: 75 pcs. per minute Completely refurbished by HBR acc. to CE...

DOUBLE-STROKE HEADER CARLO SALVI PSV refurbished acc. to CE Standards

• Manufacturer: Carlo Salvi

DOUBLE-STROKE HEADER CARLO SALVI PSV 1 Die 2 Blow Refurbished by H.B.R. srl acc. to CE Standards DOUBLE-STROKE HEADER CARLO SALVI PSV Number of die: 1 Number of punches: 2 Min. and max. wire diam.: 0,8 ÷ 3 ...

CARLO SALVI SPV - operationa, fully functional - Revised in 2024

• Manufacturer: Carlo Salvi

CARLO SALVI PSV operational, fully functional Revised in 2024. Technical information: diam. min. and max. wire: 0,8 - 1,3 mm. max. cutoff length: 37 mm. max. shank length: 25 mm. max production per min.: 60...

DOUBLE STROKE HEADER SACMA SP.01 refurbished acc. to CE Standards

• Manufacturer: Sacma

DOUBLE STROKE HEADER SACMA SP.01 Refurbished acc. to CE Standards. Available c/o HBR srl Test before shipment the machinery. Number of dies: 1 Number of punches: 2 Cutoff diameter (min./max.): 2 ÷ 4 mm. Ma...