Used Extruders

Trusted Seller
BATTENFELD CINCINNATI CM55
- Manufacturer: Battenfeld-Cincinnati
Used Battenfeld-Cincinnati model CM55 counter rotating approximately 55mm diameter twin screw extruder. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with 0.20...
Hainesport, NJ
Trusted Seller
Cincinnati CMT80L-APC
- Manufacturer: Cincinnati
- Model: CMT
Used Cincinnati model CMT80L-APC conical counter rotating twin screw plastic extruder. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adaptor plate that reduces the barrel exit down...
Hainesport, NJ
Trusted Seller
ZUMBACH KW20
- Manufacturer: Zumbach
- Model: KW20
Used Zumbach model KW20 surface fault detector.
Hainesport, NJ
Trusted Seller
ZUMBACH KW20
- Manufacturer: Zumbach
- Model: KW20
Used Zumbach model KW20 surface fault detector.
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 2.5"
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw.
Hainesport, NJ
Trusted Seller
BERLYN HV-3
- Manufacturer: BERLYN
Used 18" wide Berlyn high velocity air stripper. Model HV-3, Sserial #1021171. Has 5 HP blower, 460 volt, 3 phase, 60 hertz. Includes starter.
Hainesport, NJ
Trusted Seller
GALA 38" x 39"
- Manufacturer: GALA
Used Gala SS bin only. Square construction, 38" x 39" with hinged top cover on 1/3 of top of bin, and openings on balance of 2/3. No pumps or filters included.
Hainesport, NJ
Trusted Seller
2006 Scheer Bay WAA300
- Manufacturer: Scheer
Used 13.5" wide Scheer Bay Model air knife. Model WAA300, Serial #WAA300-0582, new 2006. Driven by a 7.5 HP Baldor Super E motor, 460 volt 3 phase 60 hertz. Includes starter and controls. Caster mounted. Previous...
Hainesport, NJ
Trusted Seller
GALA 403VDW
- Manufacturer: GALA
Used 50,000 Lb. Per Hour Gala Model 403VDW Stainless Steel Spin Dryer 43" diameter circular housing 20 hp Baldor motor Serial No. 911039-2
Hainesport, NJ
Trusted Seller
GALA 16.2ECLN-BF
- Manufacturer: GALA
Used Gala Stainless Steel Spin Dryer Model 16.2ECLN-BF Serial #982157
Hainesport, NJ
Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor
- Manufacturer: TheysohnTheysohn
54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...
Belvidere, IL
Trusted Seller
CO-EX BLOCK 6-Layer
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
LEISTRITZ 30mm
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Trusted Seller
WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 40mm Werner & Pfleiderer co-rotating Twin Screw Extruder. Model ZSK40, serial #180399, new 1990. Has 46/1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/...
Hainesport, NJ
Trusted Seller
2014 STEER OMICRON 12P
- Manufacturer: STEER
Used 12mm 45/1 L/D Steer Engineering co-rotating twin screw extruder with chrome plated steel screws and barrel. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes contr...
Hainesport, NJ