Used Agitators, Blenders, Mixers in Saxony, Germany

Gear motor 5.5 kW 307 rpm Dissolver agitator #B17404

Geared motor with dissolver Agitator Parallel shaft geared motor Flange geared motor Angular gear unit Agitator motor Agitator drive unused NORD gear unit construction 5.5 kW 307 rpm 380/660 V IP55 Hollow shaft: ...

Gear motor 5.5 kW 307 rpm dissolver agitator #B17403

Geared motor with dissolver Agitator Parallel shaft geared motor Flange geared motor Angular gear unit Agitator motor Agitator drive unused NORD gear unit construction 5.5 kW 307 rpm 380/660 V IP55 Hollow shaft: ...

Gear motor 5.5 kW 307 rpm Tank dissolver agitator #B17402

Gear motor tank mixer, agitator Flat geared motor Flange geared motor Angular gear unit Agitator motor Agitator drive unused NORD gear unit construction 5.5 kW 307 rpm 380/660 V IP55 Hollow shaft: Ø approx. 50 mm...

1999 Continuous mixer 55 kW #B17062

• Manufacturer: AVA-HUEP GmbH

Continuous mixer, single-shaft mixer, trough mixer for heavy-duty mixers used ideally suited for large throughput quantities Manufacturer AVA-HUEP GmbH capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm ...

Single-shaft paddle mixer #B16519

Mixing plant Dimensions 330 x 160 x 200 cm + Gear motor Single-shaft paddle mixer Overall dimensions 3.5 m x 1.6 m x 2 m Mixing tank 3 m long x 1.6 m diameter Total volume approx. 6 m³ With hollow shaft gear moto...

Trough mixer 1.5 kW stainless steel #B16692

Trough approx. 1500 x 850 x 1100 mm 1.5 kW 5.3 rpm Single-shaft mixer, trough mixer, stainless steel, used Manufacturer unknown Stainless steel Bottom is closed with a slide valve (this has yet to be manufactured...

Paddle mixer stainless steel approx. 2800 mm #B17253

Mixer stainless steel, mixing auger, auger mixer, paddle mixer used Inlet approx. 700 x 320 mm stainless steel A motor can be retrofitted by us according to your requirements.

Stainless steel tank 6500 l with agitator #B13882

• Manufacturer: Unknown

stainless steel tank, stainless steel tank, biogas tank with agitator volume approx. 6500 l stainless steel plate approx. 3 mm thickness Agitator with 5 kW SIEMENS gear motor The tank was used in a hygenization f...

Pendraulic dissolver

Dissolver, mixing unit, agitator, with mixing vessel PENDRAULIC WDV 7.5 Length ( stirrer ): 1000 mm, diameter ( stirrer ): Ø 200 mm Material ( stirrer ): Stainless steel Gearbox: STÖBER R67-0000-NK 360 - 1800 rpm...

STAMO / Getriebebau NORD DEx 160L/4K

• Manufacturer: Getriebebau-NORD

Agitator gear motor n2: 16 rpm / M2: 8923 Nm Motor: Manufacturer: HEW hollow shaft Ø 100 mm, with feather key 15 kW / 1465 rpm Ex-protected / IP 55 / 380 V Subject to changes and errors in technical data, specifi...

Dosing hopper Ø 1200 mm #B15008

• Manufacturer: K-TRON SODER

Dosing hopper, weighing hopper used for K-TRON screw feeder stainless steel cone diameter max approx. 1200 mm min approx. 300 mm height approx. 2700 mm volume approx. 2 m³ stirrer drive 0,55 kw

KLOSE KDR 308-20

• Manufacturer: KLOSE

Roller drive, motorized roller, feed drive, roller gear used roll width ca. 380 mm roll diameter approx. 150 mm 300 rpm torque = 2,8 kpm 500 V 50 Hz Total approx. 1250 x 350 x 350 mm The roller drives come from a...

Une paddle snail #23421

combined trough/tubular auger with paddle and threaded part and sight flaps , unused total length 5800 mm trough length with paddles 4000 mm trough width (inside) 430 mm pipe length with thread on outlet side 100...

2001 T-s-i.de Mixing and dosing technology GmbH Mastermix

• Manufacturer: T-s-i.de Misch-und Dosiertechnik GmbH

2-component mixing and dosing system, drum emptying system container drum emptying emptying system glue glue press pump used Container sizes Ø 600 x 900 mm and Ø 300 x 500 mm Boom length approx. 3800 mm Pneumatic...

Dosing device Dosing screws #B17039

Stainless steel dosing unit dosing screws second-hand stainless steel tank approx. 0,6 m³ one auger Ø 230 mm Drive with gear motor 3 kW 90 rpm Ø 150 mm 1.5 kW 76 rpm All items are checked for function before deli...