Used Agitators in Bremen, Germany

Agitator tank 13 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with curved bottoms, inclined blade agitator from the top center, 4 kW, approx. 40 rpm, with bottom bearing, internal pipe coil on the cylinder and lower bottom, operating...

Agitator tank 7 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bases. Grid agitator from the top center, 7.5 kW, approx. 40 rpm. Double jacket around cylinder and lower base for pressureless heating/cooling. Insulation aro...

Agitator tank 0.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on three feet with conical bases. Eccentric agitator from above. Anchor stirrer 1.1 kW, 32 rpm. Double jacket around the cylinder and lower base for pressureless heating and cooling....

6100 liter heat-/coolable agitator tank, Aisi 316 with jet stream mixer

max. allowable working temperature: 80 °C max. allowable working temperature (dj): 80 °C Temperature control cylinder (dj): double jacket remarks: Insulation only around the cylindrical part of the tank; flanged ...

Agitator tank 1.25 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on three feet, height-adjustable, with a conical upper base and a flat lower base with a gradient to the outlet. Inclined blade agitator, eccentric from above, 1.1/1.8 kW, 14.5/29 rp...

Agitator tank 15.5 cbm

• Manufacturer: Sielmann

Operating data: Working pressure 1 bar, as per nameplate Design: Cylindrical, standing on a Femit frame, dished ends, reinforced upper end, disc agitator mounted from above, unused motor, 18.5 kW, approx. 30 rpm,...

Agitator tank 22 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with bracing, with conical bottoms, propeller agitator from above, eccentric, 3.7 kW, 470 rpm, insulation around the cylinder and lower base, fully weld...

Agitator tank 1 cbm

• Manufacturer: Sielmann

Operating data: According to the nameplate, designed for 0.5 bar operating pressure. Design: Cylinder, standing on 4 feet, with conical bottoms. Agitator from above, 2x Z-stirrers, 1.5 kW, 64 rpm. Half-pipe coil ...

Agitator tank 2.56 cbm

• Manufacturer: Sielmann

Design: cylindrical, suspended on 4 Fe claws, with a flat upper end, flanged, and a dished lower end. Small anchor agitator mounted from the top center, 1.7/2.6 kW, 16/31.5 rpm, with baffle. Double jacket around ...

Agitator tank 25.6 cbm

• Manufacturer: Sielmann

Design: Cylinder, standing on 4 feet, height-adjustable, with conical bases, inclined blade agitator, eccentric from above, 2.2/4.4 kW, 19/39 rpm, with base bearing, external PE coils around 1/2 cylinder Ø 10 mm ...

Agitator tank 1.05 cbm

• Manufacturer: Sielmann

Design: Manufactured according to technical regulations PED; ASME VIII Div.1, Ed. 2004, Add. 2006 Classification 97/23/EC - PED Art. 3(3) (calculation/welding and test plan/drawings/parts list available) Designed...

Agitator tank 12.5 cbm

• Manufacturer: Sielmann

Content: 12.5 cubic meters | Material: stainless steel | Material specification: V2A, 1.4301 weld seams ground inside | Diameter: 2400 mm | Cyl. height: 2500 mm | Height agitator: 400 mm | Upper floor: 400 mm | ...

Agitator tank 10.9 cbm, insulated

• Manufacturer: Sielmann

Version: cyl. Suspended on 3 brackets with a curved upper base and a 20° conical lower base. 4-way mixer with 2 blades each, without agitator lantern and drive. 125 mm thick insulation around the cylinder and low...

Agitator tank 1.1 cbm, hanging

• Manufacturer: Sielmann

Design: cylindrical, suspended on 4 supports with curved bottoms. Propeller agitator driven from above, eccentric, 1.1 kW, 156 rpm. Connections: 1 hinged lid dome Ø 400 mm in the upper bottom, 1 nipple 1" outlet ...

Agitator tank 12.8 cbm, insulated

• Manufacturer: Sielmann

Design: cylinder, standing on 4 feet, height-adjustable, with conical bottoms, propeller agitator installed diagonally in the cylinder, 0.55 kW, 950 rpm, with internal PE heating coils for heating with 3 bar hot ...