Building Filters
2004 DAEWOO DMV4020
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
Fanuc 21i MB Wired for Fourth X axis travel: 40" | Y axis travel: 20" | Z axis travel: 24.6" | Rapid rate x axis: 1,181 IPM | Rapid rate y axis: 1,181 IPM | Table size: 39.4" x 17.7" | Max table load: 1,760 LBS |...
- Trusted Seller
2004 Daewoo Puma TT2500SY
- Manufacturer: Daewoo
- Model: Puma 2500SY
- Power requirement: 76.62 kW
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.* Equipped With: Fanuc ...
Lake Elsinore, CA - Trusted Seller
DAEWOO BC18T
- Manufacturer: Daewoo
- Model: BC18T
- Lifting capacity: 1,587.57 kg
- Fuel type: electric
All of our Equipment comes in Like New Condition, with a FULL COVERAGE 120 Day Warranty on the Forklift, and 1 Year on the Battery! We also offer the option to EXTEND the Warranty on your Forklift to 1 Year! Mira...
- Trusted Seller
Daewoo DMV-4020 CNC Vertical Machining Center, 2002
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
Up for sale: 2002 Daewoo DMV-4020 CNC Vertical Machining Center. Used, with 40"x20"x24.6" travels, 20 hp, 8,000 RPM spindle, CT40 taper, and 24 ATC capacity.
Los Angeles, CA - Trusted Seller
1997 DAEWOO PUMA 200C CNC Turning Center with Bar Feeder
- Manufacturer: Daewoo
- Model: Puma 200C
- Spindle bore: 76 mm
Fanuc 18T CNC Control 8″ 3 Jaw Hydraulic Chuck 4,500 RPM A2-6 Spindle 3" Spindle Bore 2.56″ Bar Capacity 13.78″ Turning Diameter: 15.75″ Turning Length: 20.08″ Swing Over Bed 9.53″ X-Axis Travel 17.32″ Z...
Los Angeles, CA 
2001 DAEWOO DMV4020
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
Control: Fanuc 21iMB X Axis Travel: 40.1" Y Axis Travel: 20.1" Z Axis Travel: 24.6" Table Loading Area: 19.7" x 47.2" Max. Table Load: 1,760 lbs. Table T-Slot Spacing: (4) 4.92" x .71" Spindle Nose to Table Top: ...
1999 DAEWOO G25S-2
- Manufacturer: Daewoo
- Model: G25S-2
- Hours: 3,815 h
- Lifting capacity: 2,500 kg
4,500 lbs. Max. Weight Capacity, 3 Stage Mast, 188” Max Lift Height, 86” Lowered Mast Height, 41” Forks, Side Shift, Hercules Dual Fuel Engine, Open Operator Station, LP Tank Included We rebuild engine cylinder h...
- Trusted Seller
Daewoo DNB-130R CNC Horizontal Table Type Boring Mill
- Manufacturer: Daewoo
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.* The Daewoo DNB-130R C...
Lake Elsinore, CA 
Daewoo Compact Refrigerator 4.2 cu.ft.
- Manufacturer: Daewoo
Daewoo Compacy Refrigerator; 4.2 cu.ft., General purpose, Black color. Manual defrost; Temp. range: 2 to 7C; 2 interior shelves; 115V, 60 Hz.
Vista, CA- Trusted Seller
1997 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours
- Manufacturer: Daewoo
- Model: Puma 250B
- Spindle bore: 76 mm
12" 3 Jaw Hydraulic Chuck Tool Presetter Chip Conveyor Hydraulic Tailstock RS 232 Port Interface Boxed Ways Coolant Tank with Pump All Available Static Tooling All Available Manuals Wired 220V Electrics **...
DAEWOO PUMA 10 FANUC 3T CNC LATHE SPINDLE DRAW BAR DRAWBAR TUBE
- Manufacturer: Daewoo
- Model: Puma 10
THIS PART WAS REMOVED FROM A DAEWOO PUMA 10 CNC LATHE WITH FANUC 3T CONTROL THAT WE DISMANTLED.
$200 USDSanta Clarita, CADAEWOO PUMA 12S-3A 10S CNC LATHE TURRET TOOL HOLDER BLOCK PLASTIC COVER EACH 1
- Manufacturer: Daewoo
- Model: Puma 12S-3A
THIS PART CAME FROM A 1996 DAEWOO PUMA 12S-3A CNC LATHE WITH FANUC 16-T CONTROL THAT WE STRIPPED
$60 USDLos Angeles, CA
Steady Rest Turning Lathe 12" hole leblond makino lion okuma daewoo mori haas
- Manufacturer: Daewoo
Used steady rest. Center hole diameter measures approximately 12", 22" overall height, and mounting length is 11.5" from side to side. See pictures for dimensions and email with questions. In good used shape, doe...
$1,500 USDSanta Clarita, CA
Steady Rest Turning Lathe 10" hole leblond makino lion okuma daewoo mori haas
- Manufacturer: Daewoo
Used steady rest. Center hole diameter measures approximately 10", 28" overall height, and mounting length is 11" from side to side. See pictures for dimensions and email with questions. In good used shape, does ...
$1,500 USDSanta Clarita, CAFANUC INPUT DRIVE A03B-0807-C011 NO. N3354 DAEWOO PUMA 12S-3A LOT OF 7 PIECES
- Manufacturer: Daewoo
- Model: Puma 12S-3A
THIS PART CAME FROM A 1996 DAEWOO PUMA 12S-3A CNC LATHE WITH FANUC 16-T CONTROL THAT WE STRIPPED
$60 USDLos Angeles, CA
Daewoo DMV 4020 Machining Center
- Manufacturer: Daewoo
- Model: DMV 4020
Good condition Daewoo DMV 4020 Machining Centers available between 2002 and 2006 years. Located in USA and other countries. Click request price for more information.
USA
