Used Mineral Processing

4,500 HP (3,355 kW) Louis Allis Motor; 1,785 RPM

• Manufacturer: Louis Allis

LOUIS ALLIS Armor Line 4,500 HP (3,355 kW) Motor: - 1785 RPM - 3 Ph - 60 Hz - 7411Z Frame - Type WPIIX - 4000 Volts - 556 Amps - Code E insulation - S.F. 1.0 - Continuous duty.

18 x 30 ft (5.5 x 9.1 m) Outotec SAG Mill with 6300 HP (4697 kW) motor

• Manufacturer: Larox

18 x 30 ft ( 5.5 x 9.15 m) Outotec SAG Mill with 6032 HP (4500 kW) motor: - Unused surplus. - Made in 2013. - Includes: Lube system, feed chute, trommel, instrumentation, inching drive, and mill liners. Enclosure...

New steel High-Chrome White Iron grinding mill liners

- New "Steel" high-chrome white iron grinding mill liners - For rod and ball mills - Shell and head liners available - Custom manufacture in North America - Liner Drawing required for quote - 4-6 month build time

Weir Model 6X500CVX10 Cyclone Cluster

• Manufacturer: Weir

- Two cyclone clusters with manifold distributors - Weir brand model 6X500CVX10 - 10 per bank - 2 banks available - Used for ball mill discharge classification - Removal and loading additional

Krebs 6-Cyclone Manifold/Distributor

- Krebs 6 cyclone manifold - Internal rubber lining - Spare cyclones, apexes, and vortexes available separately - Immediately available from storage

10 x 10 in Linatex Slurry Pumps

• Manufacturer: Linatex

10x10 Linatex Slurry Pumps - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves

Deister No. 6 Concentrating Table

• Manufacturer: Deister

Black rubber covers Handles a variety of feed sizes Handles ores, minerals, crushed slags, and drosses General Model Specifications: MFG. Capacities: Coarse Sand - 2.3 TPH Medium Sand - 1.4 TPH Fine Sand - 0.9 TP...

5 x 3 ft (1.5 x 1 m) SAG mill with 20 HP

- Skid mounted - Chain-driven with rollers under shell - Falk gearbox Motor: - 20 HP (15 kW) - 1750 RPM - 256T frame - 230/460 V - 3 Ph - 60 Hz

13.5 x 4 ft (4 x 1.2 m) Marcy SAG mill with 300 HP

- 13.5 x 4 ft shell - Originally designed for dry grinding - removed, disassembled, and in storage ready for inspection and shipping - Mill trunnions and wear parts protected during storage - Trunnion bearings cl...

24 x 8 ft (7.3 x 2.5 m) Hardinge SAG Mill with 3,000 HP

• Manufacturer: Hardinge

- 2 Flender gearboxes - Liners quoted separately - 3,000 HP GE synchronous motor - Mill is disassembled and in storage

24 x 9 ft (7.3 x 2.7 m) Boliden Allis SAG Mill with 3,000 HP

24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor - Mill shell in 1 section - Inching drive, 3 piece - Feed and discharge ends - Shell and discharge liners - Discharge ...

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

Type B-6-6 Ash Pump with 100 HP (74 kW) motor

Type B-6-6 Ash Pumps with 100 HP (74 kW) motor - Three units available.

Knelson MD30 Gold Concentrator

• Manufacturer: Knelson

General Model Specifications: Feed Size: Discharge type: Manual Discharge | Bowl: Poly G4 Bowl | Feed capacity: 30-40 Tons/Hr (27.3-36.3 Tonnes/hr.) Solids | Typical fluidization water requirement: 75-110 GPM (17...

Deister No.6 Concentrating Table

• Manufacturer: Deister

Full Size Diagonal Deck MFG. Capacities: Coarse Sand - 2.3 TPH Medium Sand - 1.4 TPH Fine Sand - 0.9 TPH Slime - 0.4 TPH Particle Top Size Coarse Sand - 10 Mesh (2.0mm) Medium Sand - 48 Mesh (0.30mm) Fine Sand - ...