Used Saws in Netherlands

kaltenbach kks400m

• Manufacturer: Kaltenbach
• Model: KKS-400

For sale very neat Kaltenbach kks400 hydraulic crosscut saw with roller track -Hydraulic clamping -Hydraulic bekr.zaag -Adjustable cutting speed -Left to right adjustable cutting angle. -Saw cooling -Removable ch...

2016 Bomar 500 ANC fully automatic aluminum saw machine

• Manufacturer: Bomar

Used BOMAR AL 500 ANC BJ 2016 (zgan) A fully automatic circular saw designed for cutting profiles and complete materials from aluminum alloys, copper and hard plastics at 90°. The saw feed is controlled pneumatic...

Gray ZS 85 (N)

• Model: ZS85N

• For cutting profiles with a horizontal and vertical mitre • Saw blade diameter: 300 mm • Maximum cutting height at 90°: 85 mm • Maximum cutting width at 90°: 380 mm • Horizontally swivel saw unit: 45°, 90° and ...

Macc NEW 315

• Manufacturer: Macc

• Saw blade diameter: 315 mm • Miter cutting from -45° to +45° • 2-speed saw blade: 40 x 80 rpm • Clamp opening: 190 mm • Cutting capacity: – Rectangle: 140 x 70 mm – Round: 65 mm – Square: 90 mm

Mecal SW 400 M

• Downward manual saw movement • Saw blade diameter 400 mm • Cutting angles: from -45° to +45° • With 2 pneumatic clamps • Pneumatic lubrication of the saw blade

Tronzadoras TL 600 A

• Automatic saw movement with two-hand operation • Rising saw blade diameter 600 mm • Cutting angles: from -22.5° to +22.5° • With 2 vertical and 2 horizontal pneumatic clamps • Pneumatic lubrication of the saw b...

Macc NTS 315

• Manufacturer: Macc

• Saw blade diameter: 315 mm • Miter cutting from -60° to +45° • 2-speed saw blade: 33 x 66 rpm • Clamp opening: 160 mm • Cutting capacity: – Rectangle: 135 x 80 mm – Round: 70 mm – Square: 90 mm

Pressta Profilma 501E

• Motor power: 7.5 kW • Saw blade diameter: 550 mm • Speed: 2,850 rpm • Maximum cutting height at 90º: 150 mm • Maximum cutting width at 90º: 270 mm • Equipped with microdosing system • Operation by means of two-...

Pressta Profilma 400V

• Motor power: 12.0 kW (optional 18.0 kW) • Saw blade diameter: 400 mm • Speed: 2,500 rpm • Maximum cutting height at 90º: 120 mm • Maximum cutting width at 90º: 200 mm • Equipped with microdosing system • Operat...

Mecal SW 553 Argus

• Manufacturer: Argus

• Saw blade diameter: 550 mm • Pneumatic positioning of saw angles: from -22.5º to 90º • Maximum saw length: 4,000 – 5,000 – 6,000 mm • Minimum saw length: 350 mm • Saw blade cooling by means of microdosing syste...

Mecal FE 400 Inox Vico-3

• Saw blade diameter: 400 mm • Servo-controlled positioning of saw angles: from -45º to +45º • Minimum/maximum saw length: 0/5,200 mm • Saw blade cooling by means of microdosing system and water emulsion cooling ...

Mecal SW 553 Reverse Garda

• Saw blade diameter: 550 mm • Servo-controlled positioning of saw angles: from -22.5º to +45º • Maximum saw length: 5,000 – 6,000 mm • Minimum saw length: 245 mm • Saw blade cooling by means of microdosing syste...

Mecal SW 453 Plug

• Saw blade diameter: 500 mm • Pneumatic positioning of saw angles: from -22.5º to 90º • Maximum saw length: 4,000 – 5,000 – 6,000 mm • Minimum saw length: 260 mm • Saw blade cooling by means of pneumatic lubrica...

Throttles TL 302-M | 302-SA

• With 1 manual (M) or 2 pneumatic (SA) clamps and lubrication of the saw blade • Manual upswing movement with saw blade diameter 300 mm • Cutting angle: only 90°

Thorwesten Exenso SSA 9

• Increased productivity when sawing steel reinforcement in automatic cycle • Material flow through FIFO system • Residual waste optimization through software • Simple touchscreen operation • Maximum profile leng...

Soenen ZV12 Saw

• Manufacturer: Soenen
• Model: ZV12

Good condition Soenen ZV12 Saws manufactured in 1998. Located in Poland and other countries. Click request price for more information.