Used Saws in England, United Kingdom

ELUMATEC MGS105 NON FERROUS UP STROKING CUT OFF SAW

• Manufacturer: Elumatec
• Model: MGS

Capacities: Complete With Pneumatic Clamps Guard Make: Elumatec Non Ferrous Up Stroking Cold Saw | Blade swivels: 45 Degrees Each Way | Blade diameter: 420mm | Blade speed: 2800 rpm | Electrics: 415v, 3ph, 50 Cyc...

1994 ELUMATEC MGS 460 NON FERROUS UP STROKING MITRE SAW

• Manufacturer: Elumatec
• Model: MGS

Capacities: Blade Diameter 300mm Blade Speed 3800rpm Blade Swivel 0 – 135 Degrees Complete With Pneumatic Clamps Guard Motor:

1994 ELUMATEC MGS 460 NON FERROUS UP STROKING MITRE SAW

• Manufacturer: Elumatec
• Model: MGS

Capacities: Complete With Pneumatic Clamps Guard Motor:

MACC TE250 Pull Down Cut off Saw

• Manufacturer: Macc

MACC TE250 Pull Down Cut off Saw. S/No. 33076 (1996). Country of Origin: Italy Please Note: This lot is located in Burton-on-Trent, UK. A charge of £25 for dismantling and loading onto suitable transport will be ...

WNS Circular Cut Off Metal Cutting Saw

• Manufacturer: WNS

Blade Diameter: 315mm Dual Angles: 90° & 45° c/w Double Clamping Vice and Coolant System 415v, 3 Phase Additional Blades Available WNS CIRCULAR CUT OFF SAW (CS315) has a cast iron head and base and is designed to...

Nova Major Floor Mounted Cut Off Saw

250mm Capacity Manual Pull Down Saw. Swivel Base. Clamping Bar Control System with Roller Stand. 78" Measuring Arm.

WNS ILERI TEKNIK V315 Circular Saw

• Manufacturer: WNS

Used Power Operated 315mm Blade Diameter 32mm Bore Movable Head 45° Right & Left Double Clamping Vice c/w Coolant Pump 2 Speeds 415v, 3 Phase Electrics, 50Hz, 1.85Kw. Worldwide Delivery* *fees apply. ILERI TEKNIK...

MECAL SW453 PLUG DOUBLE MITRE SAW WITH LEFT HAND FIXED HEAD & RIGHT HAND MOVABLE HEAD, PLC OPERATION

Make: MECAL DOUBLE MITRE SAW WITH LEFT HAND FIXED HEAD & RIGHT HAND MOVABLE HEAD Model: SW453 PLUG PLC OPERATION, Serial No 9910921, MFD 2011, Control EC609, Maximum Distance Between Blades 4000mm, Pneumatic Tilt...

IMACA CHOP SAW

STARTRITE 20RWH VERTICAL BANDSAW HYDRAULICAL TABLE SUPERB SAW

• Manufacturer: Startrite
• Phase type: Three-phase

“This used Startrite Bandsaw is available to be inspected under power in our showroom.” Startrite Vertical Bandsaw with Hydraulic Table Feed Throat 508mm Height Under Guides 254mm Blade Width 3 – 16mm Blade Lengt...