Used Rotary Tables

YUASA 550-008 SUPER ACCU-DEX ROTARY INDEXER 8" SUPER SPACER HORIZONTAL VERTICAL

• Manufacturer: Yuasa

Stantec Sales & Services is Offering the Following Equipment: YUASA 550-008 SUPER ACCU-DEX ROTARY INDEXER 8" SUPER SPACER HORIZONTAL VERTICAL Will Ship. Buyer Pays for and coordinates all shipping and transport....

National Oilwell National C-375 Rotary Table

• Manufacturer: NOV

National C-375 Rotary Table — Typical Specs Table opening diameter: 37-1/2 in (≈ 953 mm) | Static load capacity: 650 tons | Gear ratio: 3.60 | Oil reservoir capacity: 7 US gallons (≈ 26.5 L) | Overall length: 95-...

Rebuilt National 37″ 1/2C Rotary Table

• Manufacturer: NOV

Overall Dimensions: Table opening diameter: 37.5 inches (952.5 mm) | Static load capacity: 645 tons (5,850 kN) | Maximum torque: 23,870 ft·lbs (32,362 N·m) | Maximum rotational speed: 300 rpm | Gear ratio: 3.56 |...

2007 HAAS STR160 2 Axis CNC Rotary Table Trunnion Type 2007’ USA #7801

• Manufacturer: Haas

HAAS STR160 2 Axis CNC Rotary Table Trunnion Type 2007’ USA #7801 Reference #7801 Model # STR160H Serial # 901605 Year of manufacture- 2007’ Platter diameter- 6.3” Max weight on Platter- 80 Lbs. Part swing max- 1...

New Surplus National C-375 Rotary Table

• Manufacturer: NOV

Dimensions: Net Weight (including master bushing but less sprocket): 14,600 lbs (6,622 kg)

2015 Haas TR-310

• Manufacturer: Haas
• Model: TR310

Connectors and Cables A axis (tilt) max speed: 50 °/sec | A axis (tilt) max torque: 300 ft-lbf | A axis (tilt) gear ratio: 1000 ft-lbf | A axis (tilt) center height: 72:1 | B axis (rotary) # of heads / platens: ...

2014 Haas TR-160-2

• Manufacturer: Haas
• Model: TR160

(2) 160mm (6.3") T-Slotted Fixture Platters, Interface Cables, Connectors, Brushless Sigma 5 Servo Motors (2) 160mm (6.3") T-Slotted Fixture Platters, Interface Cables, Connectors, Brushless Sigma 5 Servo Motors

Delta Electronics DYNAPATH 4202879 F DELTA SERVO TRANSDUCER

• Manufacturer: Delta

2007 Haas TR-160

• Manufacturer: Haas
• Model: TR160

Sigma 1 Brushless Drive Motors, Axis Drive Cables and Connectors, Air Line and Fitting 115 Volt, Single Phase

2021 TSUDAKOMA RT251-2-4RFJ 5 AXIS

• Manufacturer: Tsudakoma

Center bore Inertia converted into motor shaft x 10-3kg.m2: .25 Clamp system Pneumatic Hydraulic** Indexing accuracy arc sec. ±22.5 Allowable load when table clamped: The RT-251 has been designed for use on horiz...

2021 TSUDAKOMA RT251-2-4RFJ 5 AXIS

• Manufacturer: Tsudakoma

Center bore Inertia converted into motor shaft x 10-3kg.m2: .25 Clamp system Pneumatic Hydraulic** Indexing accuracy arc sec. ±22.5 Allowable load when table clamped: The RT-251 has been designed for use on horiz...

2000 YUASA ROTARY TABLE

• Manufacturer: Yuasa

--Miscellaneous cables. This drive was removed from a Mori Seiki MV-55/50 vertical machining center equipped with a Yasnac MX1 CNC control.

New MARTIN 8” Dual Stallion CNC Tombstone for Dual Rotary Table #7707

• Manufacturer: Martin

New MARTIN 8” Dual Stallion CNC Tombstone for Dual Rotary Table #7707 Reference # 7707 Base plate dimensions- 18” x 46” Table sub base- 5-3/4” x 17” Platter size- 8” Platter center hub- 2” Center height- 7-1/2” M...

1999 Tsudakoma RNCV-401RB

• Manufacturer: Tsudakoma

NC Rotary Table Table diameter: 15-3/4" | Center height: 10" | Center bore diameter: 1-1/2" | Servo motor speed: 3,000 RPM | Max table speed: 16.7 RPM | Max table load: 1,100 LBS

Fibro Y 13 670 UQ Rotary Table

• Manufacturer: Fibro
• Model: Y 13 670 UQ

Good condition Fibro Y 13 670 UQ Rotary Tables available between 1973 and 1993 years. Located in Italy and other countries. Click request price for more information.