Used Processing in New Jersey, USA

Mixer-Double Arm 757.1 L (200 gallons) Carbon Steel - IPP# 212416

• Manufacturer: Baker Perkins

Sigma Blade Mixer jacket trough, tilt discharge packing glands on shaft, rated atmospheric internal, with dust cover With chain and sprocket drive on one end Unit has a seperate power pack for tilt discharge

Mixer-Double Arm 567.8 L (150 gallons) Carbon Steel - IPP# 212414

• Manufacturer: Baker Perkins

Sigma Blade Mixer jacket trough, tilt discharge. packing glands on shaft, rated atmospheric internal, with dust cover Geared both sides, driven through a jack shaft, with chain and sprocket drive on one end Unit ...

Stainless Steel 304 Mixer-Disperser - IPP# 238392

• Manufacturer: Abbe

150 Gallon,, vertical dispersion mixing machine with jacketed vessel. Dispersall Mixer Type VP, vessel rated for Full vacuum at 4 psi. Vessel size is 33.5" diameter x 41" deep, with removable top and welded botto...

Baker Perkins Ko-Neader Mixer-Continuous - IPP# 94654

• Manufacturer: Baker Perkins

Cored shaft, jacket chamber. No motor available.

Stainless Steel 304 Mixer-Continuous - IPP# 92820

• Manufacturer: Baker Perkins

ko-kneader. 8" dia x 10' long kneading chamber. Cored shaft.

Mixer-Continuous 37.3 kW (50 HP) Stainless Steel 304 - IPP# 23134

• Manufacturer: Strong Scott

turbolizer. Unit driven by Reeves varidrive 50 HP, max 1222 rpm, min 132 rpm. 14" dia x 42" low chamber. Drop door style. Packing gland on shaft.

Mixer-Continuous Stainless Steel 304 - IPP# 201456

• Manufacturer: Patterson Kelly

Zig Zag blender, continous spray nozzle blender. Rated 60 LBS/CuFt. 19.81 rpm drum rotating speed. With feed and discharge hoods designed for nitrogen purge.

Mixer-Continuous 111.9 kW (150 HP) Stainless Steel 304 - IPP# 220801

• Manufacturer: Readco

Twin barrel mixer/processor Two 8" barrels input rpm 778, output rpm, 105

Mixer-Continuous 7.5 kW (10.1 HP) Stainless Steel 316 - IPP# 704681

• Manufacturer: Baker Perkins

Type: Twin screw jacketed mixer 316 stainless steel shafts with scraper type removable blades. motor with cooling fan Unit with removable top, bottom and ends. Spare blades. Openings: feed 1-95mm; discharge 140mm...

Mixer Continuous Wahlco XN4612 B Stainless Steel 321 - IPP# 212563

• Manufacturer: Wahlco

twin shaft wad mill (pug mill) with a removable 304SS cover 1/8" thick lining Twin chrome plated mixing shafts, 5" diameter with chrome plated blades, with a CS compacting tapered screw discharge on the end of ea...

Mixer Continuous horizontal conical continuous mixer with integrated nozzles - IPP# 217875

15 ton/hr stainless steel horizontal conical continious mixer with integrated nozzles for adding up to 3 components into the powder, for mixing and agglomeration spocket wheel / chain (2) trunions, additional sma...

Mixer-Charge Can and Pony 5.1 kW (6.8 HP) Stainless Steel 316 - IPP# 85397

• Manufacturer: Haagen-Rinau

316SS body Tri-homo mixer. Int rated 10 psi @ 302 deg F (0.7 bar @ 150 deg C); 24" (600mm) dia x 17" (430mm) str side body w/aluminum cover. Manual dump w/handwheel. 3" butterfly outlet valve. Safety lock. Pressu...

Colloid Mill Peters & Smith Stainless Steel 304 - IPP# 212896

• Manufacturer: Peters & Smith

attritor Open top with welded cone bottom Charge is 5/16" chrome plated steel (52100) shot Operating liquid level is 185 gallons Agitation is by a two speed Reliance 25/8.3 hp, 1800/600 rpm AC motor through a Sym...

Rosenmund and Cogiem Filter 5 m² (53.8 ft²) Stainless Steel 304 - IPP# 706046

• Manufacturer: Rosenmund

Side cake discharge Carbon steel straight jacket on side only The agitator raise/lower mechanism driven by 2.2/2.5 kw, 3/50/60 Hz, 220-240/380-415/440-480 volt, 1435/1735 rpm 2-speed motor Carbon steel straight j...

Evoqua M41RGP3V008D, RO and Ultra RO Filter - IPP# 233460

• Manufacturer: Evoqua

Reverse Osmosis Skid 460 volt / 60Hz / 3 Phase System utilizes 15gpm Grundfos pump driven by a 3HP Baldor motor System is a commercial/light industrial machine designed to be free standing and moveable. Its rated...